Wide Band o2

Products

  •  per page
Innovate LM-2 LM2 Digital Dual Wideband O2 AFR
Part #: 3807
Description:

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

Features:

* Patented Direct Digital Wideband Technology
* Wideband O2 Compatible with ALL fuel types
* Single or Dual Channel Version Available
* OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
* Log directly to SD card (included)
* Playback log data on screen and/or with powerful LogWorks software (included)
* Large high-contrast graphics LCD
* Built-in RPM converter (direct frequency or with optional inductive clamp)
* 4 fully-differential analog inputs
* 2 configurable linear analog outputs
* Positive lock connectors for all connections
* Innovate MTS serial IN and OUT
* USB connection to your PC


Our price: $478.95
Quantity
Innovate LM1 Window Mount Kit
Part #: inv.3751
New "Window Mount" will allow you to have the LM-1 mounted to your windshield. This will help provide a better view of the display while tuning.

Our price: $88.95
Quantity Out of stock
Innovate O2 Bung & Plug Kit
Part #: 3736
Stainless steel weld bung to add an O2 sensor for wide and use. Comes with a plug so you can remove it from the car. Get one for every car so you can move your meter around

Our price: $8.95
Quantity
Innovate O2 Bung & Plug Kit
Part #: inv.373
weld bung to add an O2 sensor for wide and use. Comes with a plug so you can remove it from the car. Get one for every car so you can move your meter around. Choose below stainless or stainless steel bung

Our price: $8.95
Quantity
Innovate Wideband Air/Fuel Gauge DB Blue w/LC-1 & O2 sensor
Part #: 3795
Features a bright blue LED display and includes the gauge, an LC-1 wideband controller, oxygen sensor & bung/plug, and the award-winning LogWorks engine-tuning software. Key benefits of the "DB" kits include:

- The industry’s most accurate and fastest-responding wideband controller.
- One additional available analog output (one connects to the gauge).
- Easy set up and wiring (instructions included).
- LC-1 includes Innovate serial in & out for adding additional modular tuning system (MTS)components.
(Gauge itself is analog only- no serial).
- "Blackout" appearance when unpowered.
- Log directly from the LC-1’s digital output into laptop w/included software.

For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis.

For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a DL-32 data logger for hundreds of hours of 32-channel data logging on an SD card.

Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of "piggyback" fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers!

Size: 52mm (2 1/16")


Our price: $177.95
Quantity
Innovate Wideband Air/Fuel Gauge DB Red w/LC-1 & O2 sensor
Part #: 3796
Features a bright red LED display and includes the gauge, an LC-1 wideband controller, oxygen sensor & bung/plug, and the award-winning LogWorks engine-tuning software. Key benefits of the "DB" kits include:

- The industry’s most accurate and fastest-responding wideband controller.
- One additional available analog output (one connects to the gauge).
- Easy set up and wiring (instructions included).
- LC-1 includes Innovate serial in & out for adding additional modular tuning system (MTS)components.
(Gauge itself is analog only- no serial).
- "Blackout" appearance when unpowered.
- Log directly from the LC-1’s digital output into laptop w/included software.

For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis.

For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a DL-32 data logger for hundreds of hours of 32-channel data logging on an SD card.

Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of "piggyback" fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers!

Size: 52mm (2 1/16")


Our price: $177.95
Quantity
NGK AFX Wide Band o2 Air/Fuel Monitor
Part #: 91101

The NGK Powerdex AFX air fuel monitor is designed to measure the air/fuel ratio delivered to performance engines. This part is a must have for ANY modified SRT4!

Includes:- Wideband oxygen sensor- Control module- 13 ft. wiring harness- Exhaust bung- Plug

Part # 91101


Our price: $269.95
Quantity
PLX Devices DM-5 Water Temperature: Standard Digital Display Module
Part #: DM-5 Water
Universal 2 1/16" (52mm) Gauge

* Affordable
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thick
* Digital Accuracy
* Must connect to SM-FluidTemp Module

DESCRIPTION:

The PLX DM-5 WaterTemp is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-FluidTemp. Measuring only 0.7" (18mm) thick, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-FluidTemp module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM:  Connection Diagram

1.3.3V from SM - Connects to the SM-FluidTemp module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES:  Simple Setup

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 WaterTemp labeled (1) automatically displays the information from SM-FluidTemp labeled (4). The DM-5 WaterTemp labeled (2) automatically displays the information from SM-FluidTemp labeled (5). The DM-5 WaterTemp labeled (3) automatically displays the information from SM-FluidTemp labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices DM-5 Oil Temperature Gauge: Standard Digital Display Module
Part #: DM-5 Oil
Universal 2 1/16" (52mm) Gauge

* Affordable
* 300 Deg Fahrenheit, 150 Deg Celsius Max
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Must connect to SM-FluidTemp Module


DESCRIPTION:

The PLX DM-5 OilTemp is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-FluidTemp. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-FluidTemp module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-FluidTemp module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES: Simple Set up

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 OilTemp labeled (1) automatically displays the information from SM-FluidTemp labeled (4). The DM-5 OilTemp labeled (2) automatically displays the information from SM-FluidTemp labeled (5). The DM-5 OilTemp labeled (3) automatically displays the information from SM-FluidTemp labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices DM-100 + SM-AFR Universal Digital Display Module and Wideband Air/Fuel Sensor Module Combo
Part #: DM-100 + SM-AFR
Universal 2 1/16" (52mm) Gauge and Air/Fuel Sensor Module
  • SEMA Award Winning Gauge
  • Measures wideband air/fuel ratio
  • Works with other iMFD sensor modules
  • 52mm Standard Size
  • Digital Accuracy
Video

Our price: $379.99
Quantity
  •  per page