Torque Solution

Products

Torque Solution Billet Aluminum Transmission Mount: Infiniti G35 2003-2007
Part #: TS-TM-G35
This mount replaces existing OEM transmission mount. The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of this mount you will see and feel an improvement with wheel hop being reduced and better traction. This mount will also aid in chassis stability allowing faster lap times with less transmission slop in the drive line. You will notice much more precise shifting in on/off throttle situations like in Road Racing & Autocross..

-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA

Our price: $109.00
Quantity
Torque Solution Billet Aluminum Upper Engine Mount: Dodge Neon SRT-4 2003-05
Part #: TS-DNSRT-001
This mount in particular is the SRT-4 and Neon TOP engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty
-Made in USA

Our price: $109.99
Quantity
Torque Solution Billet Cam Side Engine Mount: Mitsubishi Eclipse / Talon 2G 1995-1999
Part #: TS-2G-001
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM driver side engine mount. This mount can be seen in some of the fastest DSM's on the street and at the track! For best results use with Torque Solution's front engine mount, transmission mount, and rear engine mount.

* Fits Manual/Auto & FWD/AWD

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA

Our price: $134.99
Quantity
Torque Solution Billet Cam Side Engine Mount: Mitsubishi Eclipse, Talon, Laser 1990-1994
Part #: TS-1G-001
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Driver side engine mount. This mount can be seen in some of the fastest DSM'son the street and at the track! For best results use with Torque Solution's front engine mount, transmission mount, and rear engine mount.


•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA

Our price: $134.99
Quantity
Torque Solution Billet EGR Delete Kit ( Black No Logo): Mitsubishi Evolution 2003-2006
Part #: TS-EGR-005
Delete your factory EGR with our Billet EGR Block off plate.. These come with countersunk recessed screws for a nice clean look.

- Installs in under 15 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized
- Life Time Warranty
- Made in USA

Our price: $19.99
Quantity
Torque Solution Billet EGR Delete Kit Silver : Mitsubishi Evolution 2003-2006
Part #: TS-EGR-003
Delete your factory EGR with our Billet EGR Block off plate.. These come with countersunk recessed screws for a nice clean look.

- Installs in under 15 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Life Time Warranty
- Made in USA

Our price: $17.99
Quantity
Torque Solution Billet EGR Delete Kit: Mitsubishi Evolution 2003-2006
Part #: TS-EGR-001
Delete your factory EGR with our Billet EGR Block off plate.. These come with countersunk recessed screws for a nice clean look.

- Installs in under 15 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- Life Time Warranty
- Made in USA

Our price: $19.99
Quantity
Torque Solution Billet Engine Mount - Audi A3 ALL & TT MK2 2.0T & 3.2L
Part #: TS-AUDI-003
The Torque Solution engine mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Real World Torture Tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Lifetime Warranty
•Made in USA

Our price: $189.00
Quantity
Torque Solution Billet Engine Mounts: Honda S2000 2000-2007
Part #: TS-S2K-001
"Torque Solution Honda S2000 motor mounts are made from 6061 billet material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track s2000s in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Lifetime Warranty
•Made in USA"

Our price: $319.99
Quantity
Torque Solution Billet Front Engine Mount: Dodge Caliber SRT-4 2008+
Part #: TS-DC-003
Torque Solution Mounts Increase horsepower by reducing frictional lost due to poor axle geometry. Axle geometry under acceleration is very critical when trying to apply horsepower. Poor axle geometry is caused when engine and suspension center lines are changed. By installing Torque Solution Billet engine mounts engine center line are kept within precision tolerances. For street and race applications.

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Lifetime Warranty
•Made in USA

Our price: $109.99
Quantity