Torque Solution

Products

  •  per page
Torque Solution Billet Aluminum Left Engine Mount ( 2 Bolt ): 92-95 Honda Civic / 93-97 Del Sol
Part #: TS-HA-002
"The Honda Driver Side mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Left side engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA"

Our price: $94.99
Quantity
Torque Solution Billet Aluminum Left Engine Mount : Honda Civic 92-95
Part #: TS-HA-004
"The Honda Driver Side mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Left side engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA"

Our price: $94.99
Quantity
Torque Solution Billet Aluminum Lower Engine Mount: Dodge Neon 2000-05
Part #: TS-DN-002
This mount in particular is the SRT-4 and Neon lower engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty
-Made in USA

Our price: $114.99
Quantity
Torque Solution Billet Aluminum Lower Engine Mount: Dodge Neon SRT-4 2003-05
Part #: TS-DNSRT-002
This mount in particular is the SRT-4 and Neon lower engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty
-Made in USA

Our price: $114.99
Quantity
Torque Solution Billet Aluminum Passenger Side Engine Mount: Mitsubishi Evolution VII-IX 2001-2006
Part #: TS-EV-001
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM passenger side engine mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's front engine mount, transmission mount, and rear engine mount.


•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA

Our price: $129.99
Quantity
Torque Solution Billet Aluminum Rear Engine Mount: Honda Civic 92-00
Part #: TS-HA-003
"The Honda / Acura Rear mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM rear engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA"

Our price: $94.99
Quantity
Torque Solution Billet Aluminum Rear Engine Mount: Mitsubishi Evolution VII-IX 2001-2006
Part #: TS-EV-003
The Mitsubishi Evolution mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM rear engine mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, transmission mount, and front engine mount.

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA

Our price: $99.99
Quantity
Torque Solution Billet Aluminum Right Engine Mount ( 3 Bolt ): Honda Civic 92-95
Part #: TS-HA-001
"The Honda Right Side mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Right side engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!

*Hydraulic Transmission ONLY

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA"

Our price: $99.99
Quantity
Torque Solution Billet Aluminum Transmission Mount: 2003-2009 Nissan 350z
Part #: TS-TM-350
This mount replaces existing OEM transmission mount. The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of this mount you will see and feel an improvement with wheel hop being reduced and better traction. This mount will also aid in chassis stability allowing faster lap times with less transmission slop in the drive line. You will notice much more precise shifting in on/off throttle situations like in Road Racing & Autocross..

-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-LifeTime Warranty
-Made in USA

Our price: $109.00
Quantity
Torque Solution Billet Aluminum Transmission Mount: Dodge Neon SRT-4 2003-05
Part #: TS-DNSRT-003
This mount replaces existing OEM transmission mount.The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of the is mount you will see and feel an improvement with wheel hop being reduced and better traction. This is the lightest transmission mount on the market and can be seen on the fastest World Challenge SRT-4's in the world. Get what the pro's have at a price you can afford!

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA

Our price: $110.00
Quantity
  •  per page