Torque Solution

Products

Torque Solution Cam Angle Sensor Bracket: Subaru WRX 2002-2005
Part #: TS-SU-203
This part is used for mounting the cam angle sensor to the front of Non North American Spec STi cylinder heads. Perfect for adapting USDM cylinder heads to Japanese and European market engines or adapting
STI heads to non AVCS engines.

*Includes Hardware

-Lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Lifetime Warranty
-Made in USA

Our price: $54.99
Quantity
Torque Solution Camber Control Arms ( Dogbone ): Porsche 911 996/997
Part #: TS-POR-002
Torque Solution Rear Dogbone Kit is designed to correct the rear suspension geometry on your lowered Porsche 996/997. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. if you plan to track your car or get the full life of your tires these are a must have..

Made of 6061-T6 Aluminum w/ FK Rod Ends. 4 links Total Included in Each Package Requires NO modification to chassis, direct bolt on replacement part. Can be used on daily driven street cars & is highly recommended for Street or Track setups..

Fitment: 996TT/GT2/GT3/C2/C4/C4S 997TT/GT2/GT3/GT3 RS/C2 /C4s


-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-FK Rod Ends
-Lifetime Warranty
-Made in USA

Our price: $595.00
Quantity
Torque Solution Coil Pack Adapter- Audi / VW 2.7t ALL & 1.8t ALL
Part #: TS-VW-017

Torque Solution Coil Pack Adapter
Applications: Volkswagen / Audi 2.7t ALL

The Torque Solution coil pack adapters are made from high grade 6061 billet aluminum material. These are designed to allow you to run the upgraded FSI/TSI coilpacks and replace the failure prone 2.7t coils. Thus giving you the ability to run a larger spark gap for smoother idle and more power with no loss of spark. Each adapter is a perfect fit and will give your engine bay a new look. All hardware is included for a clean install.

*Will fit all Audi/VW vehicles with 2.7t engines

- Made out of lightweight 6061-T6 billet aluminum
- Black anodized
- Lifetime Warranty
- Made in USA

Our price: $134.99
Quantity
Torque Solution Drive Shaft Carrier Bearing Support Bushings: Dodge Stealth
Part #: TS-30-DSB
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Life Time Warranty
-Made in USA

Our price: $49.99
Quantity
Torque Solution Drive Shaft Carrier Bearing Support Bushings: Galant VR4 1991,92,93
Part #: TS-GA-DSB
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA

Our price: $49.99
Quantity
Torque Solution Drive Shaft Carrier Bearing Support Bushings: Mitsubishi Eclipse 1990-99
Part #: TS-EC-DSB
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA

Our price: $49.99
Quantity
Torque Solution Drive Shaft Carrier Bearing Support Bushings: Mitsubishi Evolution 1992-12
Part #: TS-EV-DSB
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA

Our price: $49.99
Quantity
Torque Solution Driver / Passenger Engine Mount Inserts : Mitsubishi Evolution 5/6/7/8/9
Part #: TS-EV8-001
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO 8/9 engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a lifetime warranty through Torque Solution. Fits Drivers side housing and Transmission Side..

Includes 1 pair of bushings for either Cam Side of Engine or Trans Side.. If you need both you must order Qty 2.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Life Time Warranty
-Made in USA

Our price: $59.99
Quantity
Torque Solution DSM Rear Subframe Bushings: 2G Mitsubishi Eclipse / Talon AWD 1995-1999
Part #: TS-EC-300
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Rear Subframe Bushings. This system was designed to reduce movement of the rear subframe. This helps to improve transmission feedback when shifting, and gives the car a more solid feel under hard acceleration. Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket shifter bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability. All this makes it easy for us to stand behind our products with a lifetime warranty.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Street and track torture tested
-75A durometer bushings
-Life Time Warranty
-Made in USA

Our price: $129.99
Quantity
Torque Solution EGR Block Off Kit: Dodge Neon/Avenger 1995-1999
Part #: TS-EGR-420A
Delete your factory EGR with our EGR Block off plate set for your 420a Engine. Nice and easy upgrade for your engine.

- Installs in under 15 minutes
- Made out of lightweight aluminum
- Lifetime Warranty
- Made in USA

Our price: $19.99
Quantity