PLX Devices

PLX Devices

Products

  •  per page
PLX Devices DM-5 Water Temperature: Standard Digital Display Module
Part #: DM-5 Water
Universal 2 1/16" (52mm) Gauge

* Affordable
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thick
* Digital Accuracy
* Must connect to SM-FluidTemp Module

DESCRIPTION:

The PLX DM-5 WaterTemp is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-FluidTemp. Measuring only 0.7" (18mm) thick, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-FluidTemp module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM:  Connection Diagram

1.3.3V from SM - Connects to the SM-FluidTemp module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES:  Simple Setup

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 WaterTemp labeled (1) automatically displays the information from SM-FluidTemp labeled (4). The DM-5 WaterTemp labeled (2) automatically displays the information from SM-FluidTemp labeled (5). The DM-5 WaterTemp labeled (3) automatically displays the information from SM-FluidTemp labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices DM-5 Oil Temperature Gauge: Standard Digital Display Module
Part #: DM-5 Oil
Universal 2 1/16" (52mm) Gauge

* Affordable
* 300 Deg Fahrenheit, 150 Deg Celsius Max
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Must connect to SM-FluidTemp Module


DESCRIPTION:

The PLX DM-5 OilTemp is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-FluidTemp. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-FluidTemp module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-FluidTemp module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES: Simple Set up

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 OilTemp labeled (1) automatically displays the information from SM-FluidTemp labeled (4). The DM-5 OilTemp labeled (2) automatically displays the information from SM-FluidTemp labeled (5). The DM-5 OilTemp labeled (3) automatically displays the information from SM-FluidTemp labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices DM-200 + SM-AFR Combo: Universal Digital Display Module and Wideband Air/Fuel Sensor Module Combo
Part #: DM-200 + SM-AFR Combo
Universal 2 3/8" (60mm) Gauge and Air/Fuel Sensor Module

* SEMA Award Winning Gauge
* Measures wideband air/fuel ratio
* Works with other iMFD sensor modules
* 60mm Standard Size
* Digital Accuracy

 

Video

Our price: $427.95
Quantity
PLX Devices DM-5 + SM-AFR Standard Digital Display Module and Wideband Air/Fuel Sensor Module Combo
Part #: DM-5 AFR + SM-AFR
Universal 2 1/16" (52mm) Gauge and Air/Fuel Sensor Module

* Affordable
* Measures wideband air/fuel ratio
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thick
* Digital Accuracy
* Must connect to SM-AFR Module


Our price: $265.99
Quantity
PLX Devices DM-5 Air Intake Temperature Gauge: Standard Digital Display Module
Part #: DM-5 AIT
Universal 2 1/16" (52mm) Gauge

* Affordable
* 300 Deg Fahrenheit, 150 Deg Celsius Max
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Must connect to SM-AIT Module

DESCRIPTION:

The PLX DM-5 AIT is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-AIT. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-AIT module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-AIT module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES:  simple setup

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 AIT labeled (1) automatically displays the information from SM-AIT labeled (4). The DM-5 AIT labeled (2) automatically displays the information from SM-AIT labeled (5). The DM-5 AIT labeled (3) automatically displays the information from SM-AIT labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices DM-5 Exhaust Gas Temperature Pyro Gauge: Standard Digital Display Module
Part #: DM-5 EGT
Universal 2 1/16" (52mm) Gauge

* Affordable
* 1800 Deg Fahrenheit, 1000 Deg Celsius Max
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Must connect to SM-EGT Module

DESCRIPTION:

The PLX DM-5 EGT is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-EGT. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-EGT module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-EGT module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES: Simple Set Up

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 EGT labeled (1) automatically displays the information from SM-EGT labeled (4). The DM-5 EGT labeled (2) automatically displays the information from SM-EGT labeled (5). The DM-5 EGT labeled (3) automatically displays the information from SM-EGT labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C

 


Our price: $75.99
Quantity
PLX Devices DM-5 Vacuum Boost Gauge: Standard Digital Display Module
Part #: DM-5 Boost
Universal 2 1/16" (52mm) Gauge

* Measures both vacuum and boost
* 0-30 PSI range, 0-2 KG cm^2 range
* Affordable
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Must connect to SM-Vac/Boost Module

DESCRIPTION:

The PLX DM-5 Boost is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-Vac/Boost. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-Vac/Boost module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-Vac/Boost module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES: Simple Setup

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 Boost labeled (1) automatically displays the information from SM-Vac/Boost labeled (4). The DM-5 Boost labeled (2) automatically displays the information from SM-Vac/Boost labeled (5). The DM-5 Boost labeled (3) automatically displays the information from SM-Boost labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C

 


Our price: $75.99
Quantity
PLX Devices DM-5 Wideband AFR Gauge: Standard Digital Display Module
Part #: DM-5 AFR
Universal 2 1/16" (52mm) Gauge

* Wideband O2 Air Fuel Ratio gauge
* 2 1/16" Standard Size (52mm)
* 0.7" (18mm) Thin
* Digital Accuracy
* Shows AFR in gasoline and lambda mode
* Must connect to SM-AFR Module

DESCRIPTION:

The PLX DM-5 AFR is a standard size 2 1/16" (52mm) LED automotive display designed to display the values measured from the SM-AFR. Measuring only 0.7" (18mm) thin, it can virtually be mounted anywhere. The DM-5 is designed to fit into most aftermarket 2 1/16" (52mm) cups, and mounts for seamless integration into your vehicle. This is an ideal accessory for your SM-AFR module. Up to 32 can be daisy chained together in the iMFD system.

CONNECTION DIAGRAM: Connection Diagram

1.3.3V from SM - Connects to the SM-AFR module's 3.3V output. This is where the DM-5 gets it's power.
2.Serial RX - Digital Serial input from iMFD chain
3.Serial TX Digital Serial output to remaining iMFD chain

*No ground connection is necessary. Ground obtained from Serial RX, TX

USES: Simpe Setup

There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges. The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram. the DM-5 AFR labeled (1) automatically displays the information from SM-AFR labeled (4). The DM-5 AFR labeled (2) automatically displays the information from SM-AFR labeled (5). The DM-5 AFR labeled (3) automatically displays the information from SM-AFR labeled (6) and so on.... The DM-5 automatically "knows" where to look for the information with respect to where it is connected in the iMFD chain.

 

SPECIFICATIONS:
Physical Dimensions Standard 2 1/16" (52mm) x 0.7" (18mm)
Display Technology LED (3 Digit center, 16 Red, Yellow, Green Bars)
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Supply Voltage 3.3V from SM Module
Power Consumption 0.25 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C


Our price: $75.99
Quantity
PLX Devices Gauge Visor 52mm gauge
Part #: DM-100, DM-5 Visor
Fits: DM-100 and DM-5 all models.

Our price: $14.95
Quantity
PLX Devices iMFD Sensor Module - Air Intake Temperature
Part #: SM-AIT
Digital AIT Sensor K Type T.C.

DESCRIPTION:
SM-AIT accurately measures the air intake temperature of any intake manifold. This is ideal for intercooler, or aftercooler applications. Any K-Type thermocouple is compatible. Up to 32 SM-EGT modules can be daisy chained together in the iMFD system. SM-AIT can also be used as a stand alone unit capable of interfacing with 3rd party hardware. All Sensor Modules are housed in high quality extruded aluminum designed to operate even in the most extreme conditions. In addition, all SM modules offer outstanding digital accuracy, response and resolution which far exceeds that of a standard gauge.

CONNECTION DIAGRAM:

 

1.Connects to 12V-18V power source.
2.Analog outputs (0-5V analog output, ground)
3.Termination jumper. Closed for first SM in daisy chain.
4.Connects to next SM in daisy chain or to first DM
5.Connects to previous SM or unconnected if first SM in daisy chain
6.Connects to AIT probe K-Type Thermocouple

USES:

ANALOG OUTPUTS:

1.0-5V analog linear output

INCLUDED ITEMS:

1.SM-AIT main unit
2.4ft power wire with 2.1mm connector
3.4ft Analog wires and connector with 4 terminals
4.1ft Serial Cable
5.Termination jumper
6.Quick start guide
7.K-Type T.C (sold separately)

SPECIFICATIONS:
Physical Dimensions 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Accuracy ~0.5 Deg C (~1 Deg F)
Measurement Range 0-150 Deg C (32-302 Deg F)
Analog Outputs Linear 0-5V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 0.3 Watts
Operating Temperature 0 - 85 Deg C
Sensor One K-Type Thermocouple
Enclosure Extruded Aluminum

 


Our price: $119.95
Quantity
  •  per page