Exterior

Products

  •  per page
APR Formula GT3 Mirrors Toyota MR-2 Spyder - 2000-2005
Part #: CB-320002B
When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features:

Carbon Fiber Construction
All APR Formula GT3 Mirror housings are reinforced with layers of carbon fiber sheets for weight reduction and added strength.
Wide Range of Adjustment
Every Formula GT3 Mirror include a left to right pivot arm at the mirror housing with an adjustable ball stub rod to allow a wide range of adjustment.
Aerodynamic Shape to Reduce Drag
These carbon fiber mirrors are compact and aerodynamically shaped for a low drag coefficient.
5.5" Wide Angle Convex Mirror Lens
Convex lenses are used on both driver and passenger sides mirrors to eliminate blind spots. Blue anti-glare mirror lenses are included to reduce reflections from headlight glare during nighttime driving. Please note: Blue anti-glare mirror lenses found only on 5.5" wide APR Formula GT3 Mirror housings.

Our price: $373.95
Quantity
APR S-GT Widebody Aerodynamic Kit Toyota MR-S Spyder - 2000-2005
Part #: AB-303000
At a curb weight of just a little over 2,000 lbs, the MR-2 Spyder is one of the lightest roadsters available on the market today. When bumping up the power in this little roadster rocket, the stock body and wheels can become outmatched by the increase in power. To help increase traction, APR has developed the MR-2 Spyder S-GT Wide Body Kit. Other components are also included to further increase the aerodynamic performance of the S-GT Wide Body Kit.

Because mid-engine rear wheel drive cars are prone to snappy oversteer due to the center of gravity near the middle of the vehicle, the front end of the MR-2 Spyder tend to be lighter in the front. To combat this effect, a front splitter and canards are provided with the S-GT body kit to help increase the front wheel traction. Enlarged side intake ducts were also designed into the S-GT body kit to increase the amount of air flowing into the engine bay. A GTC-300 Adjustable Carbon Fiber Wing* is also used to maximize the amount of rear wheel traction the MR-2 can produce. Finally there?s a wide body kit for the MR-2 Spyder that maintains clean street looks with all the components a race car needs.

This Aerodynamic Kit Includes:

Widebody Front Bumper
Carbon Fiber Front Wind Splitter/Undertray
Carbon Fiber Canards
Wide Body Front Fenders (45mm) with Wheel Turbulence Exhaust Ports
Widebody Side Skirt
Wide Body Rear Fenders (45mm)
Wide Body Rear Bumper with Wheel Turbulence Exhaust Ports


PLEASE NOTE: Formula GT3 Mirrors and GTC-300 Universal Wing are not included with the S-GT Widebody Kit.

Our price: $3500.95
Quantity
Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Body Kit - 4 Piece
Part #: 104578

Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Body Kit - 4 Piece

Part # 104578

Fits: 2000-2005 Toyota MRS. Fits All Models, Base Model, Spyder, GT.

Trim: ALL

Material: FRP (Fiberglass Reinforced Plastics)

2000-2005 Toyota MRS Duraflex C-1 Body Kit - 4 Piece - Includes
- C-1 Front Bumper Cover (104517)
- Type W Side Skirts Rocker Panels (100213)
- C-1 Rear Bumper Cover (104518)

Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%


Our price: $494.95
Quantity
Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Front Bumper Cover - 1 Piece
Part #: 104517

Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Front Bumper Cover - 1 Piece

Part # 104517

Fits: 2000-2005 Toyota MRS. Fits All Models, Base Model, Spyder, GT.

Trim: ALL

Material: FRP (Fiberglass Reinforced Plastics)

Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%


Our price: $183.95
Quantity
Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Rear Bumper Cover - 1 Piece
Part #: 104518

Extreme Dimensions 2000-2005 Toyota MRS Duraflex C-1 Rear Bumper Cover - 1 Piece

Part # 104518

Fits: 2000-2005 Toyota MRS. Fits All Models, Base Model, Spyder, GT.

Trim: ALL

Material: FRP (Fiberglass Reinforced Plastics)

Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%


Our price: $183.95
Quantity
Extreme Dimensions 2004-2005 Toyota MRS Duraflex TD3000 Front Lip Under Spoiler Air Dam - 1 Piece
Part #: 108782
2004-2005 Toyota MRS Duraflex TD3000 Front Lip Under Spoiler Air Dam - 1 Piece

Fits the following models: Fits All Models, Base Model, Spyder, GT

Extreme Dimensions revolutionized the fiberglass market with our line of Duraflex aerodynamics. Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.

High Quality 6 oz. Fiberglass
Signature Black Finish
High Quality Mesh Grille (where applicable)
General Instruction Guide
Hardware Kit
Reduced Damage Rate Up To 75%

Installation Difficulty : Medium
Part number : 108782
Trim : ALL
Material : FRP (Fiberglass Reinforced Plastics)
Brand : Duraflex

Our price: $156.00
Quantity
GReddy Rear Under Spoiler -FRP- 90-96
Part #: 17010066

Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler.
While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler. The GRACER Side Skirt is designed to smooth out the air turbulence towards the back of the vehicle, to achieve safe handling of the vehicle.
The GRACER Rear Spoiler is not just another cosmetic rear spoiler, in addition to enhancing the appearance of the vehicle it was also designed to be extremely functional. GRACER Aero Kits are designed to give maximum down force and airflow effect to maximum performance form the original body style.


Our price: $374.95
Quantity
GReddy Side Skirt -FRP- 90-96 (Pair)
Part #: 17010063

Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler.
While driving air turbulence occurs around the front tire, this turbulence can disturb airflow all the way to the back of the vehicle, where it can reduce the function of the rear spoiler. The GRACER Side Skirt is designed to smooth out the air turbulence towards the back of the vehicle, to achieve safe handling of the vehicle.
The GRACER Rear Spoiler is not just another cosmetic rear spoiler, in addition to enhancing the appearance of the vehicle it was also designed to be extremely functional. GRACER Aero Kits are designed to give maximum down force and airflow effect to maximum performance form the original body style.


Our price: $749.95
Quantity
Seibon Carbon OEM Style Carbon Fber Hood - Toyota MR-2 1991-1999
Part #: HD9195TYMR2-OE
Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.
 
Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product. 
 
Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.

Our price: $595.00
Quantity
Seibon Carbon OEM Style Carbon Fiber Front Lip - Toyota MRS 2000-2003
Part #: FL0003TYMRS-OE
Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.
 
Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product. 
 
Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.

Our price: $442.00
Quantity
  •  per page