Engine

Products

  •  per page
Apexi Metal Head Gasket: Nissan Skyline RB25DET 1989-02: 86mm/87mm
Part #: 814-N20

The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory headgasket. A'PEXi recommends replacing the factory headgasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal.

Application:

Nissan Skyline RB25DET 1989-02 86mm T=0.8
Nissan Skyline RB25DET 1989-02 86mm T=1.1
Nissan Skyline RB25DET 1989-02 86mm T=1.5
Nissan Skyline RB25DET 1989-02 86mm T=1.8

Nissan Skyline RB25DET 1989-02 87mm T=0.8
Nissan Skyline RB25DET 1989-02 87mm T=1.1
Nissan Skyline RB25DET 1989-02 87mm T=1.5
Nissan Skyline RB25DET 1989-02 87mm T=1.8


Our price: $349.95
Market price: $425.00 save 18%
Quantity
Apexi Metal Head Gasket: Nissan Skyline RB26DETT: 0.8, 1.1, 1.5, 1.8: 86mm/87mm
Part #: 814-N00

The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory headgasket. A'PEXi recommends replacing the factory headgasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal.

Application:

Nissan Skyline RB26DETT HeadGasket 86mm T=0.8
Nissan Skyline RB26DETT HeadGasket 86mm T=1.1
Nissan Skyline RB26DETT HeadGasket 86mm T=1.5
Nissan Skyline RB26DETT HeadGasket 86mm T=1.8

Nissan Skyline RB26DETT HeadGasket 87mm T=0.8
Nissan Skyline RB26DETT HeadGasket 87mm T=1.1
Nissan Skyline RB26DETT HeadGasket 87mm T=1.5
Nissan Skyline RB26DETT HeadGasket 87mm T=1.8


Our price: $245.95
Market price: $299.00 save 18%
Quantity
Cobb Tuning R35 GTR AccessPort
Part #: AP-NIS-005

COBB Tuning is proud to announce the release of the AccessPORT Engine Management for the Nissan R35 GT-R. The AccessPORT provides complete control over the factory engine management system. Using the provided Stage 1 or Stage 2 calibration maps in conjunction with appropriate exhaust modifications, users can see significant performance gains across the entire power band. The AccessPORT also provides users with many convenience features such as anti-theft mode, economy mode, and valet mode calibrations along with a fully featured DTC code reader. More than just a programmer, the AccessPORT is the ultimate all-in-one solution for the GT-R enthusiast.

AccessPORT features:

• Reflashes ECU through factory Data Port (OBD)

• Ability to uninstall and revert back to original (stock) ECU data

• Ability to store multiple maps, allows switching between maps at user's convenience

• Ability to read DTCs (trouble codes) from the ECU, BCM, Multi-AV, IPDM, Pre-crash

Seat Belt, Meter/M&A, and Adaptive HL computers

• Ability to clear DTCs (trouble codes) from all vehicle computers including "Bonnet Light"

• Ability to update reflash maps as improvements become available

• Periodic Internet updates providing new features and improved support

The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!

But the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to also read any of the DTC (trouble) codes on the various computers on the GT-R as well as clear them out of memory (reset them).

This product is available for both North American and Japanese models

Stage 1 is for stock vehicles or vehicles with aftermarket Cat Back Exhaust
Stage 2 is for vehicles with high flow cats or cat delete pipes, and cat back exhaust. MUST USE STOCK INTAKES!

Stage1-91 Octane- +55HP and +60TQ
Stage1-93 Octane- +63HP and +70TQ
Stage1-97 RON- +63HP and +70TQ

Stage2 - 91 Octane +65HP and +80TQ
Stage2 - 93 Octane +70HP and +90TQ
Stage2 - 97 RON +70HP and +90TQ

Stock Boost 12 PSI
Stage1 Boost 14.5 PSI
Stage2 Biist 16.5 PSI


Our price: $895.00
Quantity Out of stock
Dress Up Bolts Engine Bay Kit and RB26 Kit - Nissan Skyline R34 (1998-2002)
Part #: DUB-27
The R34 Engine Bay Dress Up Bolt Kit includes 63 high quality Titanium Fasteners. The Skyline R34 GTR RB26 Engine Dress Up Kit includes 15 Pieces for the coil cover and crank angle sensor.

Available in Colors: Blue, Black, Polished, Gold, Purple and True Burned.

Dress Up Bolts fasteners (bolts, nuts and washers) are professional race grade hardware with show car style. Made from 6AL-4V Grade 5 Titanium, they provide exceptional high tensile strength, are corrosion resistant, all while being ultra lightweight.

Save money by selecting both Dress Up kits!

Our price: $246.95
Quantity
Dress Up Bolts Engine Bay Kit and RB26 Kit - Nissan Skyline R32 (1989-1994)
Part #: DUB-25
The R32 Engine Bay Dress Up Bolt Kit includes 67 high quality Titanium Fasteners. The Skyline R32 GTR RB26 Engine Dress Up Kit includes 15 Pieces for the coil cover and crank angle sensor.

Available in Colors: Blue, Black, Polished, Gold, Purple and True Burned.

Dress Up Bolts fasteners (bolts, nuts and washers) are professional race grade hardware with show car style. Made from 6AL-4V Grade 5 Titanium, they provide exceptional high tensile strength, are corrosion resistant, all while being ultra lightweight.

Save money by selecting Both the Engine and Engine Bay Dress Up Kits!

Our price: $242.95
Quantity
Dress Up Bolts RB26 Engine Bay Kit and RB26 Kit - Nissan Skyline R33 (1993-1998)
Part #: DUB-26
The Engine Bay Dress Up Bolt Kit includes 55 high quality Titanium Fasteners. The Skyline R33 GTR RB26 Engine Dress Up Kit includes 15 Pieces for the coil cover and crank angle sensor.

Available in Colors: Blue, Black, Polished, Gold, Purple and True Burned.

Dress Up Bolts fasteners (bolts, nuts and washers) are professional race grade hardware with show car style. Made from 6AL-4V Grade 5 Titanium, they provide exceptional high tensile strength, are corrosion resistant, all while being ultra lightweight.

Save money when you purchase both the Engine Bay Kit and RB26 Engine Kit.

Our price: $197.95
Quantity
Greddy E-Manage Ultimate: Nissan G35 (VQ35DE) 02+, 350Z 02+
Part #: 15921505

The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. But unlike the original e-manage, the Ultimate is more refined, requiring specific application usage (which we are constantly adding application updates that you can download FREE via greddy.com, Tech WebPages.) The benefit of this is, the included PC-based USB "Ultimate Support Tool" allows for even finer tuning capabilities, improved flexibility in fuel & ignition control and adds impressive data-logging qualities to make tuning quicker and easier. The increased number of input and output ports of the Ultimate, along with new built-in adapters add many new options to the unit. In addition to standard e-manage airflow-based adjustments, the Ultimate version includes new and upgraded features. The Parameter Set-up, tab menu format of the Ultimate has improved direct Map control for adding and subtracting Fuel and Ignition. The ability to switch between 2 preset tuning Maps (i.e. Street or Race program) via externally mounted toggle switches. There are Maps for Individual cylinder adjustment for both Fuel and Ignition. There are also options to convert injection and ignition systems (i.e. group or sequential injection and group or individual fire ignition.) An Airflow Output Map option even allows for airflow meter elimination. And when used with a wideband A/F Meter, the Air Fuel Target Map can self-tune an Injector base tuning Map, to speed up initial tuning. There are also built-in Boost, Rev and Speed Limiter-Cut features. To create super smooth operation, there are various fine tuning Correction Maps to adjust for Throttle Acceleration, Vehicle Speed, Water Temp, Intake Temp, Auto Trans Shift, Anti Engine Stall, and Idle. To further aid in tuning, e-manage Ultimate's improved integrated Monitoring, Map Tracing and Datalogging features far exceed any other piggyback controller on the market. Even when not connected to the software, 8 channels of datalogging (at 20msec intervals) can be recorded and stored to be reviewed later. With the Support Tool connected, over 30 channels can be covered. Other new features include: Improved RPM recognition, Warning Settings, Password Protection for individual tuning Maps, NVCS (Nissan), VTEC (Honda), O2 Feed-back, Clean Fouled Plugs, and numerous others in future updates. Ideal for optimizing and fine-tuning for performance products like Exhaust, Air Intake, Intercoolers, Boost Controllers, and Turbochargers, the e-manage Ultimate fills the gaps between conventional piggyback and expensive stand-alone engine managements. All installation and tuning should only be made by a trained technician with proper air/fuel monitoring tools. (Some or all functions may not be compatible with some applications.)

Notes: N-13 Plug & Play Harness for the E-Manage Ultimate. Ignition Adapter 1 Include, Diodes Included in Ignition Harness

Applications:

Nissan G35 (VQ35DE) 02+

Nissan 350Z (Z33) (VQ35DE 02+ 


Our price: $247.00
Quantity Out of stock
Greddy E-Manage Ultimate: Nissan Skyline 1989-01
Part #: 15921506

The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. But unlike the original e-manage, the Ultimate is more refined, requiring specific application usage (which we are constantly adding application updates that you can download FREE via greddy.com, Tech WebPages.) The benefit of this is, the included PC-based USB "Ultimate Support Tool" allows for even finer tuning capabilities, improved flexibility in fuel & ignition control and adds impressive data-logging qualities to make tuning quicker and easier. The increased number of input and output ports of the Ultimate, along with new built-in adapters add many new options to the unit. In addition to standard e-manage airflow-based adjustments, the Ultimate version includes new and upgraded features. The Parameter Set-up, tab menu format of the Ultimate has improved direct Map control for adding and subtracting Fuel and Ignition. The ability to switch between 2 preset tuning Maps (i.e. Street or Race program) via externally mounted toggle switches. There are Maps for Individual cylinder adjustment for both Fuel and Ignition. There are also options to convert injection and ignition systems (i.e. group or sequential injection and group or individual fire ignition.) An Airflow Output Map option even allows for airflow meter elimination. And when used with a wideband A/F Meter, the Air Fuel Target Map can self-tune an Injector base tuning Map, to speed up initial tuning. There are also built-in Boost, Rev and Speed Limiter-Cut features. To create super smooth operation, there are various fine tuning Correction Maps to adjust for Throttle Acceleration, Vehicle Speed, Water Temp, Intake Temp, Auto Trans Shift, Anti Engine Stall, and Idle. To further aid in tuning, e-manage Ultimate's improved integrated Monitoring, Map Tracing and Datalogging features far exceed any other piggyback controller on the market. Even when not connected to the software, 8 channels of datalogging (at 20msec intervals) can be recorded and stored to be reviewed later. With the Support Tool connected, over 30 channels can be covered. Other new features include: Improved RPM recognition, Warning Settings, Password Protection for individual tuning Maps, NVCS (Nissan), VTEC (Honda), O2 Feed-back, Clean Fouled Plugs, and numerous others in future updates. Ideal for optimizing and fine-tuning for performance products like Exhaust, Air Intake, Intercoolers, Boost Controllers, and Turbochargers, the e-manage Ultimate fills the gaps between conventional piggyback and expensive stand-alone engine managements. All installation and tuning should only be made by a trained technician with proper air/fuel monitoring tools. (Some or all functions may not be compatible with some applications.)

Applications:

Nissan Skyline GT-R (BNR34) RB26DETT 1999-01; N-4 Plug & Play Harness for the E-Manage Ultimate
Nissan Skyline GT-R (BCNR33) RB26DETT 1995-98; N-4 Plug & Play Harness for the E-Manage Ultimate
Nissan Skyline GT-R (BNR32) RB6DETT 1989-94; N-4 Plug & Play Harness for the E-Manage Ultimate
Nissan SKyline (ECR33) RB25DET 1993-98; N-4 Plug & Play Harness for the E-Manage Ultimate; Manual Transmission Only
Nissan Skyline (HCR32) RB20DET 1989-93; N-4 Plug & Play Harness for the E-Manage Ultimate; Manual Transmission only

Our price: $209.00
Quantity
Greddy Pulley Kits: Nissan BCNR33
Part #: 13522112

Product Details: Parasitic drag decreases performance. By installing GReddy’s lightweight, blue anodized Duralumin Pulleys for the water pump, power steering and alternator, power loses can be kept to a minimum. Ideal for tuned engines, these kits look good and perform well.

Fits:

Nissan BCNR33, RB26DETT

Dsc. Size:  with p, p/s, alt

Notes: with hatachi alternator
 


Our price: $375.25
Quantity
Greddy Pulley Kits: Nissan BCNR33/BNR34
Part #: 13522111

Product Details: Parasitic drag decreases performance. By installing GReddy’s lightweight, blue anodized Duralumin Pulleys for the water pump, power steering and alternator, power loses can be kept to a minimum. Ideal for tuned engines, these kits look good and perform well.

Fits:

Nissan BCNR33/BNR34, RB26DETT

Dsc. Size:  with p, p/s, alt

Notes: with mitsubishi alternator
 


Our price: $361.00
Quantity
  •  per page