AGP Turbo

AGP Turbo
AGP Turbo is a manufacturer of high performance turbo kits and parts. They specialize in the Turbo Neon SRT-4, EVO, DSM, Corvette, and PT Cruiser.

Products

  •  per page
AGP 3 inch Cold Air Intake System Turbo Neon SRT-4
Part #: AGP-SRT-CAI

Upgrade your SRT-4 the first and only true 3 inch intake system. The intake begins in the fender well and extends all the way to the turbo's compressor inlet. All silicone connectors, hose clamps, and necessary hardware is included. This piece is powdercoated silver, black, red, blue, yellow to match your SRT-4.The intake kit includes the upper and lower pipe, high flow conical filter, hose clamps, silicone couplers, and the bracket for the factory solonoids.

Fits: Dodge Turbo Neon SRT-4 03-05

Shipping Notes: Please note we do not stock this part at this time and they are build to order. Shipment usually takes at least 2-3 weeks or longer. There is no express delivery available.


Our price: $194.95
Quantity
AGP Billet SRT-4 Wastegate Actuator Kit
Part #: AGP-SRT-WGA
Do you want more performance out of your Turbo Neon SRT-4? Then it is time to ditch your stock 4psi wastegate actuator for this high pressure adjustable Garrett unit. This replaces the factory installed piece, and will allow you to hold higher boost pressures to redline. No longer will your boost drop off to 11psi by 6000 RPM. We've been able to hold over 15psi, which seems to be the limit of the stock fuel system. Other benefits include reducing the amount of boost spike, as well as eliminating the oscillation that is common with light spring actuators. This kit includes a custom machined bracket to mount up to the factory points on the back of the compressor housing and is fully adjustable for preload. Fits Turbo Neon SRT-4 03-05

Our price: $178.95
Quantity
AGP EVM Blow Off Valve Conversion Kit
Part #: AGP-SRT-EVM

The AGP Turbo Performance EVM (External Vent Mod)Blow Off Valve Conversion Kit reduces the intake air temperature by venting the hot compressed air to the atmosphere and not re-circulating it into the intake. It provides a distinctive Sound. This Kit uses the STOCK Blow off valve, and vents that to the atmosphere. Fits: Dodge Turbo Neon SRT-4 03+

-->> SRT-4 Tech Tip: <<--  This is a conversion kitthat allows you to vent your stock BOV to the atmosphere, proving the loudwhoosh in between shifts.


Our price: $54.95
Quantity
AGP EVO Front Mount Intercooler : Lancer Evolution 8/9
Part #: AGP-EVO-FMIC
Enhance the performance of your 2003-up Mitsubishi Evolution VIII and IX with one of the best front mount intercoolers available. The AGP Turbo FMIC features polished cast aluminum end tanks tig welded to a 24x12x3.5" bar and plate core. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support.

It cools at 90-99% efficiency under almost all conditions and has less than 1psi pressure drop at 450 hp of airflow. You couldn't heat soak this if you tried. Testing of our intercooler on a 2006 EVO IX with only a turboback exhaust showed peak gains of 25 ft/lbs of torque and 25 horsepower. The intercooler showed gains throughout the entire rpm band. The FMIC includes: 24x12x3.5 core with polished cast end tanks 2.5" silicone hump hoses and clamps All necessary installation hardware

Fits: Mitsubishi Lancer Evolution VIII / IX


Our price: $524.95
Quantity
AGP EVO Oil Accumulator : Lancer Evolution 8/9
Part #: AGP-EVO-OILACCUM

The 4G63 in the Evolution VIII/IX is a high horsepower turbocharged engine and runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus Mitsubishi designed a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.

Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. AGP has been testing a real solution for a while now that will actually separate the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.

The AGP three chamber oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perforated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.
 

The bottom of the Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil. The Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay. This will fit the Evolution perfectly and comes with hose and hose clamps for an easy installation.


Our price: $134.95
Quantity
AGP EVO Solid Front Engine Mount
Part #: AGP-FEM-EVO

Completely replace your factory front lower roll stop on your Evolution VIII and IX with the AGP turbo solid mount. The frame is constructed with CNC precision and tig welded for superior strength. AGP turbo has selected bushings perfectly matched to allow reduced engine movement without causing extreme vibration which is common in other mounts on the market today. Help eliminate your engine movement with one of these mounts and cut down on wheel hop as well as firm up your shifting when banging gears. For a long lasting finish the body is powdercoated in black.

TECH TIP: This is a complete replacement for the front engine mount, and NOT just a pressed insert.

Fits: Lancer Evolution 8, 9

Part # AGP-FEM-EVO


Our price: $84.95
Quantity Out of stock
AGP Lower Intercooler Hard Pipe
Part #: AGP-SRT-LHP
Introducing the Lower Hard Pipe for the SRT-4. This piece replaces the factory rubber hose that goes from the hot side charge pipe to the inlet of the intercooler. The LHP comes with a silver powderdcoated tube with beaded ends along with all necessary hose clamps and 4 ply silicone connectors for a perfect fit.

Fits: Dodge Turbo Neon SRT-4  

TECH TIP: After installation your will notice quicker turbo spool and a more efficient intercooler system.


Our price: $89.95
Quantity
AGP RACE Front Mount Intercooler Neon SRT-4
Part #: AGP-SRT-FMICRACE

Most of you are not ready for this. If you're serious, this 24x12x4.5 inchbar and plate core assembly is the largest, highest flowing IC core on themarket for the SRT-4. (AGP 3.5" thick core was the largest before.) Thiscore flows so well, we can't even measure pressure drop in this system. This kitallows the use of your stock or any aftermarket intercooler piping soinstallation is a very easy task.

Fits: Dodge Turbo Neon SRT-4 03-05

Tech Tip: Because of the thickness of this core, you will be advisedto trim a 1/2 inch in two places on your bumper cover.

Shipping Notes: Please note we do not stock this part at this time and they are build to order. Shipment usually takes at least 2-3 weeks or longer. There is no express delivery available.

 


Our price: $594.95
Quantity
AGP Solid Engine Mounts Dodge Turbo Neon SRT-4
Part #: AGP-SRT-MOUNTS
The factory engine mounts for the SRT-4 are inadequate for even a stock car. Upgrade to the AGP Solid Mount kit and eliminate your wheel hop. This kit is absolutely necessary for a modified SRT-4, and can improve drivability and will definitely cut down your quarter mile times. The kit includes a solid upper mount, solid lower mount, and washers for the top mount.Fits: Dodge Turbo Neon SRT-4 03+

Our price: $144.95
Quantity
AGP SRT-4 Billet Steel Shift Selector
Part #: AGP-SRT-SHIFT

If you've broken your factory shift selector, you know how much of a PITA it was to find a replacement. Unfortunately you can only purchase a replacement assembly costing nearly $400+ from the dealer.

AGP Turbo now has a better solution. This billet shift selector was designed to be a factory replacement for the stock unit, and made out of billet hardened tool steel. The factory cast piece has been proven to not withstand the high demands of today's high horsepower SRT-4s.

Fits: Dodge Turbo Neon SRT-4

Part # AGP-SRT-SHIFT


Our price: $114.95
Quantity
  •  per page