AEM

AEM
We have the lowest AEM Intake Prices and the largest selection AEM products. We stock AEM intakes for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

  •  per page
AEM 30-4350 TRU-BOOST Gauge Type Boost Controller
Part #: 30-4350

AEM 30-4350 Tru boost goes great with the AEM UEGO wide band. This unit has a dual feature! You can read your boost and adjust it all from 1 unit!

  • Complete stand-alone boost controller gauge

  • On-board pressure sensor included for boost levels up to 29 PSI

  • Two user selectable units

  • Peak boost memory

  • User selectable over boost alarm with overboost shutdown

  • User scaleable bar graph display

  • User selectable waste gate delay for quick turbo spool

  • External warning lamp driver

  • No external interface required for programming

  • Easy to install harness allows for quick and easy installation

  • Boost hose and fittings included for easy hookup to on-board pressure sensor

TECH TIP: The AEM tru boost is 52mm (2 1/16") size and will fit any of our 52mm size gauge pods.

Part # 30-4350


Our price: $312.60
Market price: $411.25 save 24%
Quantity
AEM 4 Pack Coil Kit, CDI Long Pencil: Universal
Part #: 30-2851-4PK
CDI Pencil Coil

AEM's new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, when Pencil Coils are used in high-boost, high-RPM, or high-compression applications, an increase in spark energy can be seen over factory smart coils.

AVAILABLE APPLICATIONS
# 30-2850: Single Coil Kit, CDI Short Pencil

# 30-2851: Single Coil Kit, CDI Long Pencil

# 30-2850-4PK: 4 Pack Coil Kit, CDI Short Pencil

# 30-2851-4PK: 4 Pack Coil Kit, CDI Long Pencil


*Legal in California only for racing vehicles which may never be used upon a highway.

KEY FEATURES

Compatible with all standard automotive spark plugs including threaded tip style
Kit includes pencil coil, connector, connector pins, pin lock and weather seals
Available in two different lengths for optimum plug reach
Two-wire CDI compatible coil
Must be used with CDI ignition module
MEASUREMENTS: Long coils measure 6.54 inches in total length
MEASUREMENTS: Short coils measure 5.64 inches in total length


Our price: $261.39
Quantity
AEM 4 Pack Coil Kit, CDI Short Pencil: Universal
Part #: 30-2850-4PK
CDI Pencil Coil

AEM's new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, when Pencil Coils are used in high-boost, high-RPM, or high-compression applications, an increase in spark energy can be seen over factory smart coils.

AVAILABLE APPLICATIONS
# 30-2850: Single Coil Kit, CDI Short Pencil

# 30-2851: Single Coil Kit, CDI Long Pencil

# 30-2850-4PK: 4 Pack Coil Kit, CDI Short Pencil

# 30-2851-4PK: 4 Pack Coil Kit, CDI Long Pencil


*Legal in California only for racing vehicles which may never be used upon a highway.

KEY FEATURES

Compatible with all standard automotive spark plugs including threaded tip style
Kit includes pencil coil, connector, connector pins, pin lock and weather seals
Available in two different lengths for optimum plug reach
Two-wire CDI compatible coil
Must be used with CDI ignition module
MEASUREMENTS: Long coils measure 6.54 inches in total length
MEASUREMENTS: Short coils measure 5.64 inches in total length


Our price: $261.39
Quantity
AEM 4-Channel K-Type Thermocouple Amplifier
Part #: 30-2204
4-channel K-type thermocouple amplifier.

AEM's 4-Channel K-Type Thermocouple Amplifier provides laboratory-grade accuracy for virtually any on-board temperature measurements. This unit utilizes low-cost K-Type thermocouple amplifiers to measure multiple engine system temperatures with better accuracy and faster response times than currently available temperature-measuring devices.

Unlike common single-channel gauges and amplifiers whose readings can vary up to 20? C from actual temperatures, AEM guarantees its 4-Channel K-Type Thermocouple Amplifier to read better than 1% full scale, even at the extremes of the temperature range! The unit achieves its laboratory-grade accuracy via a 100% surface-mounted PCB (printed circuit board) that has four differential temperature inputs fed into an A/D converter and fitted using a stage-three, eighth-order polynomial curve fit. The amplifier then compensates for this value using AEM's on-board cold junction temperature measurement, and then sends the temperature outputs on feedback-monitored 0-5v analog outputs and an RS-232 serial data stream.

The 4-Channel K-Type Thermocouple Amplifier is ideal for users who want to accurately monitor multiple engine system temperatures, including water, air, coolant, fuel, disc brake and more. Multiple channels allow you to use each amp to simultaneously read different system temperatures (one channel for EGT, one channel for CLT, etc.). Users can utilize ANY K-Type thermocouple including commonly-available miniature thermocouple connectors, and datalog the readings via an RS-232 serial data stream. K-Type sensors sold separately.

Uses common miniature thermocouple connectors or ANY K-Type thermocouple
On-board cold junction temperature compensation for laboratory-grade accuracy
Includes FOUR (4) 0-5v analog outputs
0-1,000? C(32-1,832? F) measurement range
Measures up to 20? C below cold junction temperature
RS-232 serial port included for datalogging (programmable EMS not required)
"Fault LEDs" indicate when a thermocouple is faulty
High-quality Deutsch connector
Mating harness included


Our price: $319.24
Quantity
AEM 5 Bar External Sensor Kit : For AEM TRU-BOOST
Part #: 30-4351

The AEM 5 Bar External Sensor kit allows you to run boost levels higher then 29psi.

Fits: AEM TRU-BOOST Gauge Type Boost Controller # 30-4350

Part # 30-4351


Our price: $188.70
Quantity
AEM 5 Bolt Cam Gears - Lancer EVO
Part #: 23-831BK
AEM TRU-TIME Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Our gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile in one-degree increments via true laser-etched markings. Precision-cut gear teeth ensure no premature wearing of the belt surface and AEM's anodizing on the gear teeth is lab-test proven as the hardest anodizing process on the market.

AEM TRU-TIME Adjustable Cam Gears are available in a multi-spoke, five-bolt design for most vehicles and our classic full-faced, three-bolt design for select applications. Five-bolt cam gears have an "8" in the suffix (23-8XX), and three-bolt cam gears have a "6" in the suffix (23-6XX).

Increase horsepower and torque without any cam changes and are ideal for heavily modified engines
Grade-8, six-point hex bolts stand up to repeated adjustments and feature an integral washer flange for greater load distribution
True laser-etched markings on the leading edge of the gear allow for quick, accurate adjustments
Hard anodizing on belt surface is lab-tested as the most durable anodizing on the market
CNC-machined from 6061-T6 billet aluminum
Comprehensive installation instructions, recommended cam gear settings and decals included
Manufactured and assembled in the USA
For Off-Road use only

Price is per (1) Black Only!


Our price: $241.56
Quantity
AEM 72" Serial EMS Coms Cable
Part #: 35-3001
72" serial EMS coms cable.

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

High-quality sealed sensor housings
Mating connector and 12" leads included (sensors)
Accurate and affordable!


Our price: $6.26
Quantity
AEM 96" UEGO Sensor Replacement Cable for "Gauge-Type" Controller
Part #: 35-3400
96" UEGO sensor replacement cable for "Gauge-Type" Controller.

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

High-quality sealed sensor housings
Mating connector and 12" leads included (sensors)
Accurate and affordable!


Our price: $15.37
Quantity
AEM Adjustable Fuel Pressure Regulator: Acura CL, 1996-97, Honda Del Sol 1996-97, Civic 1996-00, Accord 1994-97
Part #: 25-304BK

Application:

Acura CL 1997 2.2L L4 - F22B1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Honda Accord 1994-1997 2.2L L4 - F22B1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1994-1997 2.2L L4 - F22B2 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1996 2.2L L4 - F22B2 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic del Sol 1996-1997 1.6L L4 - D16Y8 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
CR-V 1997-1998 2.0L L4 - B20B4 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only 


Our price: $142.56
Quantity
AEM Adjustable Fuel Pressure Regulator: Acura Integra, Honda Accord, Civic, Del Sol, Prelude
Part #: 25-300BK

Application:

Acura Integra 1994-2001 1.8L L4 - B18B1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Integra 1994-2001 1.8L L4 - B18C1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Honda Accord 1987-1989 2.0L L4 - A20A3 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1987-1989 2.0L L4 - A20A3 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1991 2.2L L4 - - Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1990-1993 2.2L L4 - F22A1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1990-1991 2.2L L4 - F22A4 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Accord 1991-1993 2.2L L4 - F22A6 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic 1992-1995 1.5L L4 - D15B7 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic 1992-1995 1.5L L4 - D15B8 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic 1992-1995 1.5L L4 - D15Z1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic 1992-1995 1.6L L4 - D16Z6 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic 1999-2000 1.6L L4 - B16A2 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic del Sol 1993-1995 1.5L L4 - D15B7 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic del Sol 1996-1997 1.6L L4 - B16A2 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic del Sol 1994-1995 1.6L L4 - B16A3 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Civic del Sol 1993-1995 1.6L L4 - D16Z6 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 1991 2.0L L4 - B20A5 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 1991 2.1L L4 - B21A1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 1990 2.1L L4 - B21A1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 1992-1996 2.2L L4 - F22A1 Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 2.0 Si 1988-1990 2.0L L4 - - Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only
Prelude 2.0 Si 4WS 1988-1989 2.0L L4 - - Naturally Aspirated
Install Time - .5 hr. Emissions Compliance - No, Offroad Use Only


Our price: $129.78
Quantity
  •  per page