AEM

AEM
We have the lowest AEM Intake Prices and the largest selection AEM products. We stock AEM intakes for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

  •  per page
AEM Black Cold Air Intake - Subaru BRZ/Scion FR-S
Part #: 41-1408DS
AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit your Scion FR-S and Subaru BRZ.

In recent testing the AEM FR-S/BRZ intake produced 10 hp 8.3 ft. lbs of torque!

Our price: $394.99
Quantity Out of stock
AEM 96" UEGO Sensor Replacement Cable for "Gauge-Type" Controller
Part #: 35-3400
96" UEGO sensor replacement cable for "Gauge-Type" Controller.

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

High-quality sealed sensor housings
Mating connector and 12" leads included (sensors)
Accurate and affordable!


Our price: $30.95
Quantity
AEM 72" Serial EMS Coms Cable
Part #: 35-3001
72" serial EMS coms cable.

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

High-quality sealed sensor housings
Mating connector and 12" leads included (sensors)
Accurate and affordable!


Our price: $8.95
Quantity
AEM Plug-N-Pin Kit for EMS 30-1010, 1012, 1020, 1050's, 1052's & 1060's
Part #: 35-2610
Plug-N-Pin Kit for EMS 30-1010, 1012, 1020, 1050's, 1052's & 1060's

AEM's high-quality, color-coded master wiring harnesses include everything you need to properly wire your racecar in one easy-to-follow configuration (sold separately). We silk-screen each individual wire function onto the body of the wire to ease the installation process and reduce any chance of misidentifying a wire during set-up.

AEM's 72" master wiring harness includes built-in fuses and relays for fans, pumps, auxiliary power, and more. AEM also has a 24" wiring harness for adapting our Universal EMS system to an exiting wiring race car harness, and harness mating connector kit with 104 contacts.

*Legal in California only for racing vehicles which may never be used upon a highway.

Color coded harness has bundle identifiers and includes silk-screened functions on wire body for easy identification
Includes integrated fuse box with relays for fans, pumps, auxiliary power and more
Bolt-in plug mates to AEM Universal EMS and eliminates any chance of separation


Our price: $61.76
Quantity
AEM Wideband Failsafe Gauge (Air/Fuel Ratios and Manifold Pressure)
Part #: 30-4900

The Wideband FAILSAFE Gauge is a Universal Exhaust Gas Oxygen (UEGO you-way-go) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.

This product is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this FAILSAFE device.

*WHAT IT INCLUDES*
The 52mm (2-1/16) Wideband FAILSAFE Gauge includes a Bosch 4.2LSU AFR wideband sensor for monitoring and feedback of AFR and an on-board boost sensor to read vacuum or boost pressures up to 30 PSIG. Both boost and AFR can be displayed in real time on the gauges face using the full color OLED screen and 24 three-color sweeping LEDs. The gauge includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window (see example strategies, below), and an RPM input to log RPM for tuning purposes.

*WHAT IT DOES*
After the engine is tuned and a safe operating window of AFR is established, the Wideband FAILSAFE Gauge continually monitors AFR and boost or vacuum to make sure that AFR does not fall out of the defined operating window at a given boost or vacuum level. If the Wideband Failsafe detects an out of range AFR reading, the gauge triggers a low side output (ground signal with a 1.5 amp draw max) that can save your engine from catastrophic damage (see example strategies, below).

Use the gauges intuitive software to configure the low side output, create a user-adjustable time delay strategy to prevent false alarms, and customize the gauge lighting to flash and alert the driver if an alarm is triggered.

The system contains an on-board data logger for logging over three hours of data recording (20 Hz per parameter) of AFR, RPM, boost, alarm, and others. Data logs can be downloaded for viewing in the new AEMdata software.

Additionally, the Wideband FAILSAFE Gauge is an ideal engine tuning tool. The highly accurate Bosch AFR wideband sensor is maintenance free and never requires free-air calibration, enabling you to fine tune AFR from an AEM programmable engine management system, any other programmable EMS or piggyback programmer. For carbureted applications, it can tell you when its time to swap carb(s), change jets or simply modify fuel pressure.

*EXAMPLE ENGINE PROTECTION STRATEGIES*
NATURALLY ASPIRATED, TURBOCHARGED OR SUPERCHARGED WITH STAND ALONE EMS OR PIGGYBACK CONTROLLER: Can use the low side output to cut revs, retard timing, trigger a separate fuel or ignition map and activate an ancillary warning light. Users with turbos can also trigger the device to cut boost (may require separate solenoid). The aforementioned strategies are provided as an example. Available failsafe strategies will ultimately be dependent on the capability of the EMS or piggyback engine controller.

*EASY TO SET UP!*
Once installed, users connect to the gauge via a USB port and use the supplied software to log an engines safe AFR operating range, set minimum and maximum AFR ranges, alarm mode, time delay strategy, failsafe strategy and gauge display configuration.

Users with an AEMnet-equipped (CAN bus) device can daisy chain the Wideband FAILSAFE gauge using the AEMnet connection (adapter sold separately). Non AEMnet devices can communicate with the device using the CAN 2.0B spec protocol. An analog output for O2 feedback is provided for users without AEMnet or CAN-equipped devices to hard wire the gauge for O2 feedback or logging in a stand-alone logger.

*WHY USE A WIDEBAND AIR/FUEL CONTROLLER?*
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power and fuel economy, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency.

*WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES:*

* Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
* No free air calibration required ever
* Internal boost sensor
* Bosch Wideband UEGO sensor and weld-in bung included
* On-Board 3+ hour Datalogging capability at 20hz per parameter
* Full color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
* 24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR)
* Intuitive set up software
* Dimmer input included
* Interchangeable faceplates and bezels (see options, below)
* Data analysis using AEMdata software

*WIDEBAND FAILSAFE GAUGE INSTALLATION FEATURES:*
* AEMnet compatible (CAN 2.0)
* Differential AFR analog output
* Differential boost analog output
* Configurable RPM input for logging
* One low-side driver output (Ground with 1.5 amp max draw)
* Positive-lock connectors
* Tunable PC-based software with USB connectivity
* Time based reset for outputs

*WIDEBAND FAILSAFE GAUGE FACEPLATE STYLES:*
Kit comes with 6 different faceplates and black and silver bezels.

* Black Vacuum only in sweeping LEDs
* Black and White AFR in sweeping LEDs
* Black and White Vacuum/Boost in sweeping LEDs
* Black Lambda in sweeping LEDs


Our price: $325.79
Quantity
AEM Oil Pressure Digital Diplay Gauge. 0-150PSI
Part #: 30-4407
Oil pressure digital diplay gauge. 0-150 PSI. Four gauge styles in one.

AEM's digital Oil Pressure display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.

AEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge-it's like having four gauge designs in one!

Gauge pressure range 0-100psi and 0-150psi
Includes easy-to-install harness and sensor
Complete stand alone gauge requires no additional sensors or programs to operate
Ideal for both fuel injected and carbureted motors
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Includes 0-5V analog output for routing to engine management system or data logger
Easy to read faceplates/displays are designed to complement existing AEM gauge styles
Included bezels and face plates allow you to personalize the look of your gauge


Our price: $206.85
Quantity
AEM Digital Turbo Boost Gauge
Part #: 30-4406

AEM’s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.

FEATURES
* Includes easy-to-install harness and sensor
* Complete stand alone gauge requires no additional sensors or programs to operate
* LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
* Includes 0-5V analog output for routing to engine management system or data logger
* Easy to read faceplates/displays are designed to complement existing AEM gauge styles
* Included bezels and face plates allow you to personalize the look of your gauge

Size: 52mm (2 1/16")

Part # 30-4406


Our price: $165.01
Quantity
AEM Digital Oil Temperature Gauge
Part #: 30-4402

AEM’s digital Oil Temperature display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions. AEM’s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge—it’s like having four gauge designs in one!

FEATURES
* Includes easy-to-install harness and sensor
* Complete stand alone gauge requires no additional sensors or programs to operate
* LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
* Includes 0-5V analog output for routing to engine management system or data logger
* Easy to read faceplates/displays are designed to complement existing AEM gauge styles
* Included bezels and face plates allow you to personalize the look of your gauge

Size: 52mm (2 1/16")

Part # 30-4402


Our price: $179.25
Quantity
AEM Digital Oil Pressure Gauge
Part #: 30-4401

AEM’s digital Oil Pressure display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.

AEM’s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge—it’s like having four gauge designs in one!

FEATURES
* Includes easy-to-install harness and sensor
* Complete stand alone gauge requires no additional sensors or programs to operate
* Ideal for both fuel injected and carbureted motors
* LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
* Includes 0-5V analog output for routing to engine management system or data logger
* Easy to read faceplates/displays are designed to complement existing AEM gauge styles
* Included bezels and face plates allow you to personalize the look of your gauge

Size: 52mm (2 1/16")

Part # 30-4401


Our price: $206.85
Quantity
AEM Digital Volt Meter Gauge
Part #: 30-4400

AEM’s digital Voltmeter display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.

AEM’s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge—it’s like having four gauge designs in one!

FEATURES
* Includes easy-to-install harness and sensor
* Complete stand alone gauge requires no additional sensors or programs to operate
* Ideal for both fuel injected and carbureted motors
* LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
* Includes 0-5V analog output for routing to engine management system or data logger
* Easy to read faceplates/displays are designed to complement existing AEM gauge styles
* Included bezels and face plates allow you to personalize the look of your gauge

Size: 52mm (2 1/16")

Part # 30-4400


Our price: $122.42
Quantity
  •  per page