ACT

ACT
We have the lowest ACT Clutch Kit Prices and the largest selection. We stock ACT Clutches for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

ACT Performance Street Clutch Disc: Integra 92-01; Civic 94-97/Prelude 90-91
Part #: 3000105

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Acura Integra Gs (1992-2001)
Acura Integra Gsr (1992-2001)
Acura Integra Ls (1992-2001)
Acura Integra Rs (1992-2001)
Acura Integra Special Edition (1992-2001)
Acura Integra Type-R (1992-2001)
Honda Civic Del Sol Vtec (1994-1997)
Honda Civic Si (1999-2000)
Honda Cr-V Ex (1997-2001)
Honda Cr-V Lx (1997-2001)
Honda Cr-V Se (1997-2001)
Honda Prelude 2.0 S (1990-1991)
Honda Prelude 2.0 Si (1990-1991)
Honda Prelude Se (1990-1991)
Honda Prelude Sr (1990-1991)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Mazda Miata 2006
Part #: 3000207

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Mazda Mx-5 Miata Base (2006)
Mazda Mx-5 Miata Club Spec (2006)
Mazda Mx-5 Miata Grand Touring (2006)
Mazda Mx-5 Miata Sport (2006)
Mazda Mx-5 Miata Touring (2006)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Miata 90-97, 99-05/RX-7 84-91/Protege 2003
Part #: 3000203

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Ford Escort Base (1991-2002)
Ford Escort Gt (1991-2002)
Ford Escort Sport (1991-2002)
Ford Escort Zx2 (1991-2002)
Ford Probe Base (1989-1997)
Ford Probe Gl (1989-1997)
Ford Probe Gt (1989-1997)
Ford Probe Lx (1989-1997)
Kia Sephia Base (1996-2001)
Kia Sephia Gs (1996-2001)
Kia Sephia Ls (1996-2001)
Kia Sephia Rs (1996-2001)
Kia Spectra Base (2000-2003)
Kia Sportage Base (1995-2002)
Mazda 323 Base (1988-1989)
Mazda 626 Base (1986-1987, 1993-2002)
Mazda 626 Dx (1986-1987, 1993-2002)
Mazda 626 Lx (1986-1987, 1993-2002)
Mazda B2000 Base (1986-1987)
Mazda B2200 Base (1990-1993)
Mazda Miata Base (1990-1997, 1999-2005)
Mazda Miata Ls (1990-1997, 1999-2005)
Mazda Miata Mazdaspeed (1990-1997, 1999-2005)
Mazda Mx-3 Base (1992-1995)
Mazda Mx-3 Gs (1992-1995)
Mazda Mx-3 Precedia (1992-1995)
Mazda Mx-5 Miata Base (2006)
Mazda Mx-5 Miata Club Spec (2006)
Mazda Mx-5 Miata Grand Touring (2006)
Mazda Mx-5 Miata Sport (2006)
Mazda Mx-5 Miata Touring (2006)
Mazda Mx-6 Base (1988-1997)
Mazda Mx-6 Dx (1988-1997)
Mazda Mx-6 Gt (1988-1997)
Mazda Mx-6 Ls (1988-1997)
Mazda Mx-6 Lx (1988-1997)
Mazda Mx-6 Rs (1988-1997)
Mazda Protege 4wd (1990-1994, 2003)
Mazda Protege Base (1990-1994, 2003)
Mazda Protege Dx (1990-1994, 2003)
Mazda Protege Gt (1990-1994, 2003)
Mazda Protege Lx (1990-1994, 2003)
Mazda Protege Mazdaspeed (1990-1994, 2003)
Mazda Protege Se (1990-1994, 2003)
Mazda Protege5 Base (2002-2003)
Mazda Rx-7 Base (1984-1991)
Mazda Rx-7 Gxl (1984-1991)
Mazda Rx-7 U (1984-1991)
Mercury Capri Base (1991-1994)
Mercury Capri Xr2 (1991-1994)
Mercury Tracer Base (1997-1999)
Mercury Tracer Ls (1997-1999)
Mercury Tracer Trio (1997-1999)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Nissan 300ZX 84-96/Maxima 85-01
Part #: 3000405

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Nissan 200sx Base (1987-1988)
Nissan 280zx 2+2 (1979-1983)
Nissan 280zx 2+2 Gl (1979-1983)
Nissan 280zx Base (1979-1983)
Nissan 300zx 2+2 (1984-1996)
Nissan 300zx Base (1984-1996)
Nissan Bluebird U12 (1989-1995)
Nissan Bluebird U13 (1989-1995)
Nissan Maxima Base (1985-2001)
Nissan Maxima Gle (1985-2001)
Nissan Maxima Gxe (1985-2001)
Nissan Maxima Se (1985-2001)
Nissan Pulsar Gtir (1991-1994)
Nissan Silvia S13 (1989-1998)
Nissan Silvia S14 (1989-1998)
Nissan Skyline Gts (1989-1998)
Nissan Skyline Gts-25 (1989-1998)


Our price: $135.95
Quantity
ACT Performance Street Clutch Disc: Probe 89-92/Mazda 6 04-06/RX-7 86-91/RX-8
Part #: 3000204

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Dodge Conquest Base (1986)
Ford Probe Gl (1989-1992)
Ford Probe Gt (1989-1992)
Ford Probe Lx (1989-1992)
Mazda 6 Base (2004-2006)
Mazda 6 S (2004-2006)
Mazda 626 Base (1988-1991)
Mazda 626 Gt (1988-1991)
Mazda 929 Base (1988-1991)
Mazda 929 S (1988-1991)
Mazda B2600 Base (1989)
Mazda Mx-6 Base (1988-1992)
Mazda Mx-6 Dx (1988-1992)
Mazda Mx-6 Gt (1988-1992)
Mazda Mx-6 Lx (1988-1992)
Mazda Rx-7 Base (1986-1991)
Mazda Rx-7 Turbo (1986-1991)
Mazda Rx-8 Base (2004-2006)
Mitsubishi Starion Base (1987-1989)

***Picture may differ slightly from actual product***


Our price: $169.95
Quantity
ACT Performance Street Clutch Disc: Saturn S series 1991-1999
Part #: 3001501

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Saturn Sc Series Base (1991-1999)
Saturn Sl Series Base (1991-1999)
Saturn Sw Series Base (1993-1999)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Scion xA/xB 04-06/Yaris 07-08/Matrix 03-04
Part #: 3000606

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Geo Prizm Base (1991,1993-1997)
Geo Prizm Lsi (1991,1993-1997)
Lotus Elise Base (2005-2008)
Lotus Exige Base (2006-2007)
Pontiac Vibe Base (2003-2004)
Pontiac Vibe Gt (2003-2004)
Scion Xa Base (2004-2006)
Scion Xb Base (2004-2006)
Toyota Celica Base (1990-1997, 2000-2005)
Toyota Celica Gt (1990-1997, 2000-2005)
Toyota Celica Gts (1990-1997, 2000-2005)
Toyota Celica St (1990-1997, 2000-2005)
Toyota Corolla Base (1980-1982, 1989-2003)
Toyota Corolla Dlx (1980-1982, 1989-2003)
Toyota Corolla Dx (1980-1982, 1989-2003)
Toyota Corolla Gts (1980-1982, 1989-2003)
Toyota Corolla Le (1980-1982, 1989-2003)
Toyota Corolla Sr5 (1980-1982, 1989-2003)
Toyota Echo Base (2000-2004)
Toyota Matrix Base (2003-2004)
Toyota Matrix Xr (2003-2004)
Toyota Matrix Xrs (2003-2004)
Toyota Mr2 Base (1985-1989)
Toyota Mr2 Spyder Base (2000-2003)
Toyota Yaris Base (2007-2008)
Toyota Yaris Ce (2007-2008)
Toyota Yaris Le (2007-2008)
Toyota Yaris Rs (2007-2008)
Toyota Yaris S (2007-2008)


Our price: $130.95
Quantity
ACT Performance Street Clutch Disc: Stealth 91-96/3000GT 93-99
Part #: 3000304

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Dodge Stealth R/T Turbo (1991-1996)
Mitsubishi 3000gt Base (1993-1999)
Mitsubishi 3000gt Sl (1993-1999)
Mitsubishi 3000gt Spyder Sl (1993-1999)
Mitsubishi 3000gt Spyder Vr-4 (1993-1999)
Mitsubishi 3000gt Vr4 (1993-1999)
Mitsubishi 3000gt Vr-4 (1993-1999)


Our price: $135.95
Quantity
ACT Performance Street Clutch Disc: Stealth 91-96/3000GT 93-99/Eclipse 95-08
Part #: 3000303

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Dodge Colt 4x4 (1993-1994)
Dodge Colt Base (1993-1994)
Dodge Colt Se (1993-1994)
Dodge Stealth Base (1991-1996)
Dodge Stealth Es (1991-1996)
Dodge Stealth R/T (1991-1996)
Dodge Stealth R/T Sport (1991-1996)
Eagle Summit Base (1992-1995)
Eagle Summit Dl (1992-1995)
Eagle Summit Lx (1992-1995)
Eagle Talon Tsi (1990-1997)
Mitsubishi 3000gt Base (1993-1999)
Mitsubishi 3000gt Sl (1993-1999)
Mitsubishi 3000gt Spyder Sl (1993-1999)
Mitsubishi Eclipse Base (1990-1992, 1995-2008)
Mitsubishi Eclipse Gs (1990-1992, 1995-2008)
Mitsubishi Eclipse Gst (1990-1992, 1995-2008)
Mitsubishi Eclipse Gsx (1990-1992, 1995-2008)
Mitsubishi Eclipse Se (1990-1992, 1995-2008)
Mitsubishi Eclipse Spyder (1990-1992, 1995-2008)
Mitsubishi Eclipse Spyder Gs (1990-1992, 1995-2008)
Mitsubishi Eclipse Spyder Gst (1990-1992, 1995-2008)
Mitsubishi Expo Base (1992-1995)
Mitsubishi Expo Lrv Base (1993-1994)
Mitsubishi Expo Lrv Sport (1993-1994)
Mitsubishi Expo Sp (1992-1995)
Mitsubishi Galant De (1990-1992, 1994-1997)
Mitsubishi Galant Es (1990-1992, 1994-1997)
Mitsubishi Galant Gs (1990-1992, 1994-1997)
Mitsubishi Galant Gsx (1990-1992, 1994-1997)
Mitsubishi Galant Ls (1990-1992, 1994-1997)
Mitsubishi Galant S (1990-1992, 1994-1997)
Mitsubishi Galant Vr-4 (1990-1992, 1994-1997)
Mitsubishi Lancer Evolution Ii (1993-1995, 2005-2006)
Mitsubishi Lancer Evolution Iii (1993-1995, 2005-2006)
Mitsubishi Lancer Ralliart (1993-1995, 2005-2006)
Plymouth Colt Vista (1992-1994)
Plymouth Colt Vista Se (1992-1994)
Plymouth Laser Rs (1990-1994)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Subaru Impreza WRX STI 2004-08
Part #: 3000503

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Subaru Impreza Wrx Sti (2004-2008)
Subaru Impreza Wrx Sti Limited (2004-2008)


Our price: $160.95
Quantity