ACT

ACT
We have the lowest ACT Clutch Kit Prices and the largest selection. We stock ACT Clutches for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

ACT Modified Street Disc: Golf 85-94/Jetta 83-94/Rabbit 83-84
Part #: 2000702

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Volkswagen Cabriolet Base (1985-1993)
Volkswagen Golf Base (1985-1994)
Volkswagen Golf Cl (1985-1994)
Volkswagen Golf Gl (1985-1994)
Volkswagen Golf Gt (1985-1994)
Volkswagen Golf Gti (1985-1994)
Volkswagen Golf Gti 8-Valve (1985-1994)
Volkswagen Golf Iii Gl (1985-1994)
Volkswagen Jetta Base (1983-1994)
Volkswagen Jetta Carat (1983-1994)
Volkswagen Jetta Cl (1983-1994)
Volkswagen Jetta Deluxe (1983-1994)
Volkswagen Jetta Gl (1983-1994)
Volkswagen Jetta Gli (1983-1994)
Volkswagen Jetta Iii Gl (1983-1994)
Volkswagen Jetta Iii Gls (1983-1994)
Volkswagen Rabbit Base (1983-1984)
Volkswagen Rabbit Gti Sport (1983-1984)
Volkswagen Scirocco Base (1983-1989)
Volkswagen Scirocco Dlx (1983-1989)


Our price: $85.95
Quantity
ACT Modified Street Disc: Mazda 3 2004-2006
Part #: 2000207

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Mazda 3 Base (2004-2006)
Mazda 3 I (2004-2006)


Our price: $106.95
Quantity
ACT Modified Street Disc: Nissan Sentra 2WD 1991-1999
Part #: 2000408

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Nissan 200sx Base (1995-1998)
Nissan 200sx Se (1995-1998)
Nissan 200sx Se-R (1995-1998)
Nissan Nx Base (1991-1993)
Nissan Pulsar Nx Base (1986-1990)
Nissan Pulsar Nx Xe (1986-1990)
Nissan Sentra Base (1991-1999)
Nissan Sentra Classic (1991-1999)
Nissan Sentra E (1991-1999)
Nissan Sentra Gle (1991-1999)
Nissan Sentra Gxe (1991-1999)
Nissan Sentra Le (1991-1999)
Nissan Sentra Se (1991-1999)
Nissan Sentra Xe (1991-1999)


Our price: $75.95
Quantity
ACT Performance Street Clutch Disc: 1G DSM/Galant 89-93/Lancer 02-05
Part #: 3000301

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Dodge Colt E (1988-1995)
Dodge Colt Es (1988-1995)
Dodge Colt Gl (1988-1995)
Dodge Colt Gt (1988-1995)
Dodge Colt Premier (1988-1995)
Dodge Colt Se (1988-1995)
Eagle Summit Base (1992-1995)
Eagle Summit Dl (1992-1995)
Eagle Summit Es (1992-1995)
Eagle Summit Esi (1992-1995)
Eagle Summit Lx (1992-1995)
Eagle Talon Base (1990-1994)
Eagle Talon Es (1990-1994)
Hyundai Elantra Base (1993-1995)
Hyundai Elantra Gl (1993-1995)
Hyundai Elantra Gls (1993-1995)
Hyundai Scoupe Base (1993-1995)
Hyundai Sonata Base (1992-1994)
Hyundai Sonata Gl (1992-1994)
Hyundai Sonata Gls (1992-1994)
Mitsubishi Eclipse Base (1990-1994)
Mitsubishi Eclipse Gs (1990-1994)
Mitsubishi Expo Lrv Base (1993)
Mitsubishi Galant Base (1989-1993)
Mitsubishi Galant Es (1989-1993)
Mitsubishi Galant Gs (1989-1993)
Mitsubishi Galant Gsr (1989-1993)
Mitsubishi Galant Ls (1989-1993)
Mitsubishi Galant S (1989-1993)
Mitsubishi Lancer Base (2002-2005)
Mitsubishi Lancer Es (2002-2005)
Mitsubishi Lancer Oz Rally (2002-2005)
Mitsubishi Mirage Base (1988-1989, 1993-2002)
Mitsubishi Mirage Es (1988-1989, 1993-2002)
Mitsubishi Mirage Ls (1988-1989, 1993-2002)
Plymouth Colt Vista (1992-1994)
Plymouth Colt Vista Se (1992-1994)
Plymouth Laser Base (1990-1994)
Plymouth Laser Rs (1990-1994)


Our price: $135.95
Quantity
ACT Performance Street Clutch Disc: 240SX 89-98/Maxima 81-84
Part #: 3000407

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Nissan 180sx S13 (1989-1993)
Nissan 240sx Base (1989-1998)
Nissan 240sx Le (1989-1998)
Nissan 240sx Se (1989-1998)
Nissan 280z Base (1975-1978)
Nissan 280zx 2+2 (1979-1983)
Nissan 280zx 2+2 Gl (1979-1983)
Nissan 280zx Base (1979-1983)
Nissan 720 Base (1980)
Nissan Axxess Base (1990-1993)
Nissan Maxima Base (1981-1984)
Nissan Maxima Sl (1981-1984)
Nissan Stanza Base (1990-1992)


Our price: $135.95
Quantity
ACT Performance Street Clutch Disc: 4 Runner 96-02/Tacoma 95-04/Tundra 00-04
Part #: 3000607

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Toyota 4runner Base (1996-2002)
Toyota 4runner Limited (1996-2002)
Toyota 4runner Sr5 (1996-2002)
Toyota Tacoma Base (1995-2004)
Toyota Tacoma Regular Cab (1995-2004)
Toyota Tacoma Sr5 (1995-2004)
Toyota Tundra Base (2000-2004)


Our price: $156.95
Quantity
ACT Performance Street Clutch Disc: 4Runner 84-93/Celica 72-74, 77-85
Part #: 3000603

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Toyota 4runner Base (1984-1993)
Toyota 4runner Dlx (1984-1993)
Toyota 4runner Sr5 (1984-1993)
Toyota Celica Base (1972-1974, 1977-1985)
Toyota Celica Gt (1972-1974, 1977-1985)
Toyota Celica Gts (1972-1974, 1977-1985)
Toyota Celica St (1972-1974, 1977-1985)
Toyota Corona Base (1971-1981)
Toyota Corona Custom (1971-1981)
Toyota Corona Dlx (1971-1981)
Toyota Corona Luxury Edition (1971-1981)
Toyota Corona Mark Ii (1971-1981)
Toyota Corona Sr5 (1971-1981)
Toyota Crown Base (1967-1972)
Toyota Mark Ii Base (1972-1974)
Toyota Pickup Base (1970,1972-1978, 1981-1995)
Toyota Pickup Dlx (1970,1972-1978, 1981-1995)
Toyota Pickup Sr5 (1970,1972-1978, 1981-1995)
Toyota Supra Base (1979-1980)
Toyota Van Wagon Crg (1984-1989)
Toyota Van Wagon Dx (1984-1989)
Toyota Van Wagon Le (1984-1989)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Accord 86-89/Civic & CRX '88/Prelude 85-87
Part #: 3000103

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Honda Accord Base (1986-1989)
Honda Accord Dx (1986-1989)
Honda Accord Exi (1986-1989)
Honda Accord Lx (1986-1989)
Honda Accord Lxi (1986-1989)
Honda Accord S (1986-1989)
Honda Accord Sei (1986-1989)
Honda Civic 4wd (1988)
Honda Crx Si (1988)
Honda Prelude 2.0 Si (1985-1987)


Our price: $118.95
Quantity
ACT Performance Street Clutch Disc: Acura CL 97/ Accord 90-02/Prelude 92-01
Part #: 3000110

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Acura Cl Base (1997)
Honda Accord 10th Anniversary (1990-2002)
Honda Accord 25th Anniversary Edition (1990-2002)
Honda Accord Dx (1990-2002)
Honda Accord Ex (1990-2002)
Honda Accord Ex-R (1990-2002)
Honda Accord Lx (1990-2002)
Honda Accord Se (1990-2002)
Honda Accord Value Package (1990-2002)
Honda Prelude 4ws (1992-2001)
Honda Prelude Base (1992-2001)
Honda Prelude S (1992-2001)
Honda Prelude Se (1992-2001)
Honda Prelude Sh (1992-2001)
Honda Prelude Si (1992-2001)
Honda Prelude Si 4ws (1992-2001)
Honda Prelude Vtec (1992-2001)


Our price: $118.95
Quantity
ACT Performance Street Clutch Disc: Acura Integra 1990-91
Part #: 3000111

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Acura Integra Gs (1990-1991)
Acura Integra Ls (1990-1991)
Acura Integra Rs (1990-1991)


Our price: $127.95
Quantity