ACT

ACT
We have the lowest ACT Clutch Kit Prices and the largest selection. We stock ACT Clutches for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

ACT Performance Street Clutch Disc: Toyota Supra 1986-92
Part #: 3000608

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Toyota Soarer Jzz30 (1991-1996)
Toyota Supra Base (1986-1992)


Our price: $135.95
Quantity
ACT Performance Street Clutch Disc: Toyota Supra 1993-98
Part #: 3000601

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Toyota Supra Base (1993-1998)
Toyota Supra Twin Turbo (1993-1998)


Our price: $199.95
Quantity
ACT Prolite Flywheel 10LB
Part #: 600210

The ACT Prolite Flywheel weighs in at 10 lbs and is made from High Quality, One-Piece, Chrome Moly Steel. We highly recommend replacing your flywheel when upgrading your Lancer Evolution clutch.

 

Fits:

 

Mitsubishi Lancer Evolution (2001-2002, 2005-2006)
Mitsubishi Lancer Evolution Mr (2001-2002, 2005-2006)
Mitsubishi Lancer Evolution Rs (2001-2002, 2005-2006)
Mitsubishi Lancer Evolution Vii (2001-2002, 2005-2006)

Part # 600210


Our price: $401.95
Quantity
ACT Prolite XACT Flywheel: Acura RSX 2002-05/Civic 2002-08
Part #: 600125

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Acura Rsx Base (2002-2005)
Acura Rsx S (2002-2005)
Honda Civic Mugen Si (2002-2008)
Honda Civic Si (2002-2008)


Our price: $340.95
Quantity
ACT Prolite XACT Flywheel: Audi TT 00-06/VW Beetle 99-04/Golf 00-05/Jetta 00-05
Part #: 600275

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Audi Tt Base (2000-2006)
Volkswagen Beetle Base (1999-2004)
Volkswagen Beetle Turbo S (1999-2004)
Volkswagen Corrado Base (1990-1994)
Volkswagen Corrado Slc (1990-1994)
Volkswagen Corrado V6 (1990-1994)
Volkswagen Golf Base (2000-2005)
Volkswagen Golf Gti (2000-2005)
Volkswagen Jetta Base (2000-2005)
Volkswagen Jetta Gl (2000-2005)
Volkswagen Jetta Gls (2000-2005)
Volkswagen Jetta Wolfsburg Edition (2000-2005)

* Must use 228mm VR62000-2005 *


Our price: $300.95
Quantity
ACT Prolite XACT Flywheel: Ford Mustang 86-95
Part #: 600410

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Ford Mustang Cobra (1986-1995)
Ford Mustang Cobra Svt (1986-1995)
Ford Mustang Gt (1986-1995)
Ford Mustang Gts (1986-1995)
Ford Mustang Lx (1986-1995)
Ford Mustang Svt Cobra R (1986-1995)


Our price: $339.95
Quantity
ACT Prolite XACT Flywheel: Ford Mustang 96-01, 03-06
Part #: 600420

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Ford Mustang Bullitt (1996-2001, 2003-2006)
Ford Mustang Cobra (1996-2001, 2003-2006)
Ford Mustang Gt (1996-2001, 2003-2006)


Our price: $318.95
Quantity
ACT Prolite XACT Flywheel: Ford Mustang 96-01, 03-06
Part #: 600430

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Ford Mustang Bullitt (1996-2001, 2003-2006)
Ford Mustang Cobra (1996-2001, 2003-2006)
Ford Mustang Gt (1996-2001, 2003-2006)


Our price: $318.95
Quantity
ACT Prolite XACT Flywheel: Honda S2000 Base (2000-2006)
Part #: 600350

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Honda S2000 Base (2000-2006)


Our price: $308.95
Quantity
ACT Prolite XACT Flywheel: Integra 90-01/Civic 94-97/CR-V 97-01
Part #: 600105

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Acura Integra Gs (1990-2001)
Acura Integra Gsr (1990-2001)
Acura Integra Ls (1990-2001)
Acura Integra Rs (1990-2001)
Acura Integra Special Edition (1990-2001)
Acura Integra Type-R (1990-2001)
Honda Civic Del Sol Vtec (1994-1997)
Honda Civic Si (1999-2000)
Honda Cr-V Ex (1997-2001)
Honda Cr-V Lx (1997-2001)
Honda Cr-V Se (1997-2001)


Our price: $225.95
Quantity