0 item(s) in your cart | Total: $0.00
|
PART SEARCH
PARTS BY CAR
PART MANUFACTURERS
SERVICES
YOUR ACCOUNT
|
TurboXS
Turbo XS 3" RFL TI Catback Exhaust - Lancer EVO
Part #: txs.ex Turbo xs RFL TI is a stunning looking cat-back exhaust system with a deep low tone. Featuring 100% T-304 SS 3" mandrel bent construction and a titanium tipped muffler. Straight through muffler design with the straightest exhaust path possible for optimal performance. Resonated mid-pipe results i... Our price: $588.00
Turbo XS 3" Stainless Downpipe: Lancer EVO 8
Part #: EVO8-FP The addition of a downpipe yields significant and increased throttle response. Turbo XS is world famous for putting out quality products at an affordable price. Fully mandrel bent 3" steel pipe. This downpipe will work with most aftermarket cat-back systems and stock cat. Fits Mitsubishi Lancer E... Our price: $275.00
Turbo XS Blow Off Valve Mounting Kit
Part #: txs.srt_adp This kit allows you to easily mount your Turbo XS BOV into your Turbo Neon SRT-4. Kit includes turbo xs pipe, hose clamps, and necessary hoses for installation. Fits: Turbo Neon SRT-4 TECH TIP: This part will only work with Turbo XS blow off valves. Our price: $79.00
Turbo XS Cat-less Race Pipe : EVO 8
Part #: EVO8-RP This 3 inch, 304 stainless steel, race pipe replaces the stock EVO8 catalytic converter Fits: Mitsubishi Lancer Evolution VIII TECH TIP: Full 3" pipe.For off road use only. Our price: $134.95
Turbo XS DTEC Air Temperature Sensor
Part #: DTEC-AIRT The TurboXS DTEC-AIRT sensor allows for an air temperature measurement when used in conjunction with the DTEC. Part # DTEC-AIRT Our price: $89.95
Turbo XS Dtec Ana/Digi Pickup
Part #: DTEC-AD The TurboXS DTEC-AD allows the DTEC to monitor important engine parameters such as injector duty cycle, throttle position, or RPM. This kit includes one digital and one analog pick-up. Part # DTEC-AD Our price: $36.95
Turbo XS DTEC Boost Controller Pro
Part #: DTEC-BC-PRO The DTEC-BC-PRO is quite simply THE BEST boost controller ever made. It turns your Gameboy Advance SP into a powerful Electronic Boost Controller cabable of controlling boost pressures in excess of 60psi. The DTEC-BC-PRO allows everything from simple "one number" boost control that can... Our price: $522.95
Turbo XS Dtec EGT Sensor
Part #: DTEC-EGT The TurboXS DTEC-EGT is a high quality type K thermal couple that allows the DTEC to monitor and log exhaust gas temperatures. Part # DTEC-EGT Our price: $142.95
Turbo XS DTEC Fuel Computer
Part #: DTEC-FC If you have modified your vehicle, then the factory engine management system may not be delivering the correct amount of fuel. The DTEC-FC can be used to restore the correct amount of fuel to ensure optimum performance. The DTEC-FC works by altering the main load signal to the factory ECU. Incre... Our price: $356.95
Turbo XS DTEC Fuel Computer + Boost Controller Pro
Part #: DTEC-BCFC This revolutionary product combines our class leading Fuel computer and boost controller into one device. The DTEC Boost Controller PRO is quite simply THE BEST boost controller ever made. It turns your Gameboy Advance SP into a powerful Electronic Boost Controller cabable of controlling boost p... Our price: $664.95
Turbo XS Dtec GBA Mount
Part #: DTECGBAMOUNT With the DTEC Gameboy mount you can easily keep your Gameboy secure under the most extreme driving conditions. (Gameboy sold separate) Part # DTECGBAMOUNT Our price: $48.95
Turbo XS DTEC Sensor MAP: SRT-4 03+, EVO8 03+, 1G DSM 90-94; 300ZX 90-96, 350Z 03-06; WRX 02-04, STI 04-06, Forester 04+; MR2 91-95, Supra 87-98; All VW/Audi 1.8T
Part #: DTEC-MAP Dtec Sensor MAP The DTEC-MAP is a plug-in manifold absolute pressure sensor that allows the DTEC to measure and datalog boost pressures up to 45psi. DTEC-MAP also plugs directly into the 350Z-UTEC giving you the ability to tune forced induction 350Z's using Speed-Density tuning mode. ... Our price: $84.15
Turbo XS Dtec Starter Kit
Part #: DTEC-STARTER The TurboXS DTEC is a revolutionary new product that turns your Nintendo® Gameboy Advance into a programmable, upgradeable, automotive performance tool for tuning, data logging, and diagnostics. Part # DTEC-STARTER Our price: $205.95
Turbo XS Dual Stage Boost Controller
Part #: txs.dsbc All the things that you like about the Standard Boost Controller with the added ability to switch between 2 pre-set boost levels from inside the cabin of your SRT-4 - even when under full boost!  The Turbo XS Dual Stage Boost Controller is installed in line with the pressure hose running from ... Our price: $229.00
Turbo XS EVO8/9 FMIC Hard Pipe Kit for 2003-2007
Part #: EVO8-FMIC-PIPE The TurboXS EVO8/9 FMIC Hard Pipe Kit can be used with either the stock FMIC or the TurboXS FMIC (EVO8-FMIC). Made from mirror polished 2.5” diameter mandrel bent aluminum, these bolt-on pipes are a direct replacement for the factory IC pipe. The TurboXS Hard Pipe Kit offers impr... Our price: $399.99
Turbo XS Front Mount Intercooler: Lancer EVO 8
Part #: EVO8-FMIC TurboXS front mount intercooler for the EVO VIII, MR, RS cars. The Front Mount Intercooler is a bar and plate design for maximum efficiency. The core can handle up to 700 wheel horsepower. The kit uses the factory or factory style intercooler piping. Includes polished end tanks and mounting brack... Market price: Our price: $529.95 save 29%
Turbo XS H-34 Blow Off Valve
Part #: txs.h34 Designed for performance, the TurboXS Racing Bypass Valve Type H relieves the pressure surge caused by changing gears or backing off the throttle quickly. Because the valve’s exhaust port can easily be plumbed back into the car’s air intake, the valve is ideal for Mass Air Flow(MAF) metered ... Our price: $178.00
Turbo XS HP Manual Boost Controller
Part #: txs.hpbc Designed for those who want the ability to radically increase their boost levels 1 to 30 psi above stock, but don’t want to pay hundreds of dollars to do it. The TurboXS High Performance Boost Controller (HPBC) is the right choice for simple, accurate and reliable high level boost control. The ... Our price: $126.00
Turbo XS Knocklite
Part #: TXSKL Detonation or "knocking" can destroy an engine in no time flat leaving you with a repair bill that can cost you thousands of dollars. So how do you KNOW that you are knocking BEFORE it's too late? The TurboXS KnockLite (TM) will detect even minor, inaudible detonation and flash the multicolored ... Our price: $128.95
Turbo XS Quad Stage Boost Controller
Part #: TXS-BC-QSBC Initially designed for professional drag racers, the TurboXS Quad Stage Boost Controller provides the ultimate in boost related FWD traction control. Pro FWD drag racers Brian Ballard and Jason Hunt have been using this boost controller in the NOPI Turbo 4 Street class for the last 2 seasons. ... Our price: $385.00
Turbo XS Radiator Hose Kit for WRX, STi, and Legacy GT
Part #: txs-WS-RADHOSE The Turbo XS WRX & STi silicone radiator hose kit are available in blue only but lets face it blue always looks good on a Subaru. These Turbo XS WRX radiator hoses will give your engine the clean and finished look you are seeking, while providing extra protection stock rubber hoses jus... Our price: $95.00
Turbo XS Replacement Bosch Knock Sensor: SRT-4 03+, EVO8 03+, 1G DSM 90-94; 300ZX 90-96; WRX 02-04, STI 04-06, Forester 04+; MR2 91-95, Supra 87-98; All VW/Audi 1.8T
Part #: Sensor-Knock-Bosch Replacement Bosch Knock Sensor This Bosch knock sensor is a replacement for the knock sensor that is included with the TurboXS Tuner-Pro. Applications: Dodge SRT-4 2003+ Mitsubishi Eclipse GST/GSX 1990-94 Mitsubishi EVO 8 2003+ Nissan 300ZX Turbo 1990-96 Subaru WRX ... Our price: $84.15
Turbo XS RFL Blow Off Valve
Part #: BOV.RFL Designed for high performance and maximum noise, the TurboXS Blow Off Valve. Type H-RFL relieves compressor pressure surge caused by changing gears or backing off the throttle quickly. The BOV Type H-RFL is designed for turbo charged engines running 10 to 25 psi boost. Vents to the Atmosphere! ... Market price: Our price: $159.95 save 16%
Turbo XS Short Ram Intake
Part #: EVO8-INTAKE The TurboXS Short Ram Air Intake (also known as the "Shorty") was designed for maximum airflow while maintaining original MAF sensor calibrations. This is extremely critical as the ecu uses this signal to determine proper air/fuel ratios. Poorly designed intakes can lead to "lean&... Our price: $113.95 |
