External Wastegates

Products

  •  per page
Rexpeed Carbon Fiber Duckbill Trunk Spoiler - EVO X / Ralliart
Part #: R170
If you are looking to replace your factory wing this Dubkbill trunk spoiler is the answer. Sleek and aggresive low profile look that will not attract too much attention especially from the police.

Trunk spoiler is made from high quality twill weave carbon fiber with clear coat finish. Includes 3M adhesives for easy install.

Will fit Evo X, Lancer and RA models.

Our price: $249.95
Quantity
Tial F38 Wastegates
Part #: WG38

TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.

The TiAL F38 is the only wastegate with the option to choose the valve stem's protective coating. To keep the overall cost of the unit down, the choice of coating was left to the customer.
 Lead Oxide which is present only when burning leaded fuels is corrosive to the Black coating on the Street valve's stem. Extended use of leaded fuel will cause performance problems and unreliable valve actuation.
  The Silver coating on the Race valve stem is resistant to the corrosive effects of Lead Oxide. Similarly works well with unleaded fuel. 

Product Information:

- 347 Stainless Steel Alloy is used for valve and valve housing.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing the same material used in the higher level gates for reliability and longevity.
- CNC Machined 304L 12mm thick weld flanges.
- Low Cost.
- Made is USA.
- Color anodized 6061-T651 aluminum actuator (Silver, Red, Blue, Purple, Gray).
- Wastegates shipped with air fittings and stainless hardware.
- Flanges are an extra cost, they do not come with the wastegate unit.

Colors:

Silver
Gray
Red
Blue
Purple

Included with every Tial F38:

F38 Assembly
F38 Valve Seat
2 Gaskets
2 TiAL Air Fittings
2 Mounting Bolts
4 Flex Washers

Features:

Counter Bore for 1.500" Tubing
Chamfered edges
Perfect match to WG ports.

Flange Compatibility Sold Separately:

WG38FLSST
F38 Flange
304L Stainless Steel
Threaded Bolt Holes
Inlet

WG38FLSS
F38 Flange
304L Stainless Steel
Smooth Bore Bolt Holes
Discharge

WG38FLMST
F38 Flange
1018 Steel
Threaded Bolt Holes
Inlet

WG38FLSS
F38 Flange
1018 Steel
Smooth Bore Bolt Holes
Discharge


Our price: $318.95
Quantity
Tial Wastegate 41mm
Part #: WG41mm

 TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.

Product Information:

- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L.
- Color anodized aluminum actuator (Black, Red, Blue, Purple).
- Wastegates shipped with air fittings and stainless hardware.

Included with every Tial F41 Wastegate:

F41 Assembly
41mm Valve Seat
8 Stainless Steel Cap Screws.
8 Stainless Steel flex washers
2 TiAL Air Fittings

Features:

Counter Bore for 1.500" Tubing
Chamfered edges
Perfect match to WG ports.

Flange Compatibility Sold Separately:

WG41FLI
F41 Flange
304L Stainless Steel
Inlet

WG40FLO
F40 Flange
304L Stainless Steel
Discharge
(Same as F40)


Our price: $352.95
Quantity
Tial Wastegate 44mm
Part #: WG44mm

 TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.

Product Information:

- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).

Included with every Tial V44:

V44 Assembly
V44 Valve Seat
Inlet V-band clamp
Inlet Flange
Outlet V-Band Clamp
Outlet Flange
2 TiAL Air Fittings

Features:

Counter Bore:
1.875" Inlet
1.750" Discharge
Chamfered edges
Perfect match to WG ports.

Flange Compatability Sold Separately:

WG44FLI
WG 44 Flange
304L Stainless Steel
Inlet

OR

WG44FLO
WG 44 Flange
304L Stainless Steel
Discharge


Our price: $362.00
Quantity
Tial Wastegate 46mm
Part #: WG46mm

Product Details:

-Nickel based super alloy is used for valve and high temp NiCrFe alloy for the valve housing offers superior product life under the most demanding conditions. (Turbo rotary applications 2000F (1093C) exhaust temperatures).
- High temperature silicone Nomex reinforced actuator diaphragm rated to 4 Bar.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, valve bushing, and lower housing fastening hardware.
- Flows .32Kg/S at 1 Bar
-Color anodized 6061-T651 aluminum actuator (Silver, Red, Blue, Purple, Black).
- Wastegates are shipped with fasting hardware, 10mm aluminum banjo type air fittings, and gaskets.
- Race proven at Daytona 24hour, on Porsche GT2 Twin Turbo.
- Flanges are an extra cost, they do not come with the wastegate unit.

Included with every Tial F46:

F46 Assembly
F46 Valve Seat
8 Stainless Steel Bolts
2 TiAL Air Fittings
2 Gaskets

Features:

Counter Bore for 1.625" Tubing
Chamfered edges
Perfect match to WG ports.

Compatible Flange Sold Separately:

WG46FL
WG 46 Flange
304L Stainless Steel
Inlet / Discharge


Our price: $520.00
Quantity
Tial Wastegate 60mm
Part #: WG60mm

 TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.

Product Information:

- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
- Flows 330 CFM @ 1psi differential pressure

Included with every Tial V60:

V60 Assembly
V60 Valve Seat
Inlet V-band clamp
Inlet Flange
Outlet V-Band Clamp
Outlet Flange
2 TiAL Air Fittings


Our price: $599.00
Quantity
Tial Wastegate Springs
Part #: Tial.wg.Springs

Tial Wastegate Springs

Spring Pressure Applications:

WG38/40mm
0.25 (3.63 psi), Small Yellow, 1.875 in OD
0.4 (5.80 psi), Small Red, 1.875 in OD
0.5 (7.25 psi), Small Green, 1.875 in OD
0.6 (8.70 psi), Small Blue, 1.875 in OD
0.7 (10.15 psi), Large Yellow, 2.36 in OD
0.8 (11.60 psi), Large  Red, 2.36 in OD 
0.9 (13.05 psi), Large  Green, 2.36 in OD
1.0 (14.50 psi), Large  Blue, 2.36 in OD

WG38/40mm HP
1.1 (15.95 psi), Large Red/Small Yellow, Small + Large
1.2 (17.40 psi), Large Red/Small Red, Small + Large
1.3 (18.85 psi), Large Red/Small Green, Small + Large
1.4 (20.30 psi), Large Red/Small Blue, Small + Large
1.5 (21.75 psi), Large Green/Small Blue, Small + Large
1.6 (23.20 psi), Large Blue/Small Blue, Small + Large

WG44/46mm
0.2 (2.90 psi), Small Yellow, 1.875 in OD
0.3 (4.35 psi), Small Red, 1.875 in OD
0.4 (5.80 psi), Small Green, 1.875 in OD
0.5 (7.25 psi), Small Blue, 1.875 in OD
0.6 (8.70 psi), Large Yellow, 2.36 in OD
0.7 (10.15 psi), Large Red, 2.36 in OD
0.8 (11.60 psi), Large Green, 2.36 in OD 
0.9 (13.05 psi), Large  Blue, 2.36 in OD

WG44/46mm HP
1.0 (14.50 psi), Large Red/Small Red, Small + Large
1.1 (15.95 psi), Large Red/Small Green, Small + Large
1.2 (17.40 psi), Large Red/Small Blue, Small + Large
1.3 (18.85 psi), Large Green/Small Blue, Small + Large
1.4 (20.30 psi), Large Blue/Small Blue, Small + Large

WG60mm
0.149 (2.17 psi), Small Yellow, 1.875 in OD
0.228 (3.31 psi), Small Red, 1.875 in OD
0.229 (4.34 psi), Small Green, 1.875 in OD
0.374 (5.43 psi), Small Blue, 1.875 in OD
0.448 (6.51 psi), Large Yellow, 2.36 in OD
0.522 (7.58 psi), Large Red, 2.36 in OD
0.592 (8.60 psi), Large Green, 2.36 in OD 
0.673 (9.77 psi), Large  Blue, 2.36 in OD

WG60mm HP
0.751 (10.90 psi), Large Red/Small Red, Small + Large
0.822 (11.93 psi), Large Red/Small Green, Small + Large
0.897 (13.02 psi), Large Red/Small Blue, Small + Large
0.967 (14.03 psi), Large Green/Small Blue, Small + Large
1.048 (15.21 psi), Large Blue/Small Blue, Small + Large

***Higher Pressure Settings require the use of both Small and Large diameter springs. When using a Dual Spring setup the resultant pressure is equal to the sum of the individual springs.

Note: Boost pressures are only an approximation based on intake manifold pressures equaling exhaust manifold pressure.


Our price: $29.50
Quantity
Tial Weld Flange 35mm Threaded Holes
Part #: WG38FLSST

F38 Flange
304L Stainless Steel
Threaded Bolt Holes
Inlet

35mm Threaded Holes

Weld On


Our price: $22.95
Quantity
Tial Weld Flange 35mm Thru Hole
Part #: WG38FLMS

Mild Steel - Inlet

35mm Thru Hole

Weld On

***Picture may not be actual Product***


Our price: $10.95
Quantity
Tial Weld Flange 35mm Thru Hole
Part #: WG38FLSS

F38 Flange
304L Stainless Steel
Smooth Bore Bolt Holes
Discharge

35mm Thru Hole

Weld On


Our price: $22.95
Quantity
  •  per page