ATP Turbo

Products

ATP Turbo Blow off Valve adapter, Greddy Type S/RS/R - Mazdaspeed6 TMIC (Now Shipping) - Mazdaspeed6
Part #: ATP-MS6-003
Blow off Valve adapter, to easily mount the Greddy Type S, Type RS, or Type R to Mazdaspeed6 stock location Top Mounted Intercooler. For atmospheric use by ordering the additional billet plug for the stock inlet pipe or recirculation use by ordering the additional recirc adapter to route back into the intake pipe.

Our price: $36.95
Quantity
ATP Turbo Blow off Valve adapter, HKS SSQ - Mazdaspeed6 TMIC - Mazdaspeed6
Part #: ATP-MS6-002
Blow off Valve adapter, to easily mount the HKS SSQ BOV to Mazdaspeed6 stock location Top Mounted Intercooler. For atmospheric use by ordering the additional billet plug for the stock inlet pipe or recirculation use by ordering the additional recirc adapter to route back into the intake pipe.

Our price: $54.95
Quantity
ATP Turbo Blow off Valve Mount Adapter, Simple 1.50" clamp-on, GReddy Type R/RS/S/RZ -VW GTI/Jetta and Audi A3
Part #: ATP-FLA-017
GReddy Type R/RS/S Blow off valve mounting adapter to 1.50" hose clamp port. Allows easy mounting of an off-the-shelf Greddy BOV onto a standard hose connection. Billet aluminum and has an anti-slip "lip" to avoid sliding under high pressure. Unit is 100% bolt on and comes with interchangeable top hat for easy changout to difference valve types by just replacing new screw on hats. Same diameter as FWD 2.0T FSI noise pipe tee so this can be used to clamp to the existing port near the throttle body using a straight section of 1.50" diameter hose and two clamps.

Our price: $47.95
Quantity
ATP Turbo Blow off Valve Mount Adapter, Simple 1.50" clamp-on, HKS SSQ BOV -VWGOLF/JETTA/AUDIA3
Part #: ATP-FLA-018
HKS SSQ Blow Off Valve mounting adapter to 1.50" hose clamp port. Allows easy mounting of an off-the-shelf HKS BOV onto a standard hose connection. Billet aluminum and has an anti-slip "lip" to avoid sliding under high pressure. Unit is 100% bolt on and comes with interchangeable top hat for easy change-out to different valve types by screwing on new hats form our modular blow off valve section. Same diameter as FWD 2.0T FSI noise pipe tee so it can be used to clamp to existing port near throttle body using a straight section of 1.5" diameter hose and two clamps.

Our price: $52.95
Quantity
ATP Turbo Bolt on turbo, 350HP Garrett dual ball bearing GT28RS turbo, Genesis Coupe 2.0T - Hyundai GenesisCoupe 2.0T
Part #: ATP-HGC-020
Bolt on turbo, Garrett 350HP GT28RS ball bearing turbo with all oil and coolant hardware. Bolts to stock flanged manifold and cat (or ATP 3" cat delete pipe and long downpipe).

Garrett's GT28RS turbo coupled with an ATP high flow exhaust housing developed for the Genesis Coupe 2.0T engine for ease of installation and stock-like appearance.

Our production of this Garrett based dual ball bearing turbo for your Genesis 2.0T Coupe is now complete and it's performance is well beyond our expectations.

This is an ultra-responsive, yet powerful turbo capable of making full boost by 3000 rpms and over 300WHP (350 crank HP) and just as much torque, on as little on 20 psi of boost on an internally stock engine when tested with our 3" turbo back exhaust system. This turbo has awesome drivability, and, with the proper supporting mods, has as much bottom end, much more mid-range than the stock turbo while capable of flowing enough air to allow you double the HP of the 2.0T engine reliably.

Work with your Tuner to add a complimentary fueling/tuning solution.

Dyno-Comp in Arizona has the ability to flash tune the HGC 2.0T ECU
http://dyno-comp.com/blog/2012/03/2011-hyundai-genesis-coupe-2-0t-stage-3-performance-package/

Our price: $1645.00
Quantity
ATP Turbo Bolt on turbo, 400HP Garrett dual ball bearing GT2871R turbo, Genesis Coupe 2.0T - Hyundai GenesisCoupe 2.0T
Part #: ATP-HGC-008
Bolt on turbo, Garrett 400HP GT2871R ball bearing turbo with all oil and coolant hardware. Bolts to stock flanged manifold and cat (or ATP 3" cat delete pipe and long downpipe).

Garrett's GT2871R turbo coupled with an ATP high flow exhaust housing developed for the Genesis Coupe 2.0T engine for ease of installation and stock-like appearance.

Our production of this Garrett based dual ball bearing turbo for your Genesis 2.0T Coupe is now complete and it's performance is well beyond our expectations.

This is an ultra-responsive, yet powerful turbo capable of making full boost by 3500 rpms and 350WHP (400 crank HP) and just as much torque, on as little on 22 psi of boost on an internally stock engine when tested with our 3" turbo back exhaust system. This turbo has awesome drivability, and, with the proper supporting mods, has as much bottom end, much more mid-range than the stock turbo while capable of flowing enough air to allow you double the HP of the 2.0T engine reliably.

Work with your Tuner to add a complimentary fueling/tuning solution and you're good for the ultimate streetcar that is capable of 12 second timeslips.

Our price: $1695.00
Quantity
ATP Turbo Bolt on turbo, 450HP Garrett dual ball bearing GT3071R turbo, Genesis Coupe 2.0T - Hyundai GenesisCoupe 2.0T
Part #: ATP-HGC-009
Bolt on turbo, Garrett 450HP GT3071R ball bearing turbo with all oil and coolant hardware. Bolts to stock flanged manifold and cat (or ATP 3" cat delete pipe and long downpipe).

Garrett's GT3071R turbo coupled with an ATP high flow exhaust housing developed for the Genesis Coupe 2.0T engine for ease of installation and stock-like appearance.

Our production of this Garrett based dual ball bearing turbo for your Genesis 2.0T Coupe is now complete the result is well beyond our expectations.

This is a very responsive and powerful turbo capable of making full boost by 3800 rpms and 400WHP (450 crank HP) and just as much torque, on as little on 23-24 psi of boost on an internally stock engine when tested with our 3" turbo back exhaust system. This turbo has awesome drivability, and, with the proper supporting mods, has as much bottom end , a lot more mid-range than the stock turbo while capable of flowing enough air to allow you more than double the HP of the 2.0T engine reliably.

Work with your Tuner to add a complimentary fueling/tuning solution and you're good for the ultimate streetcar that is capable of running deep into the 12's and close to 120MPH trap speeds should you choose to make an occasional trip to the dragstrip.

Our price: $1795.00
Quantity
ATP Turbo Bolt on turbo, 500HP Garrett dual ball bearing GT3076R turbo, Genesis Coupe 2.0T - Hyundai GenesisCoupe 2.0T
Part #: ATP-HGC-010
Bolt on turbo, Garrett 500HP GT3076R ball bearing turbo with all oil and coolant hardware. Bolts to stock flanged manifold and cat(or ATP 3" cat delete pipe and long downpipe).

Dyno-Comp in Arizona has the ability to flash tune the HGC 2.0T ECU
http://dyno-comp.com/blog/2012/03/2011-hyundai-genesis-coupe-2-0t-stage-3-performance-package/

Our price: $1895.00
Quantity
ATP Turbo Boost Cut Killer Module, Mazdaspeed6 /mazdaspeed3/CX7 - Mazdaspeed3
Part #: ATP-MS6-013
Boost-Cut Killer module for Mazdaspeed6 /mazdaspeed3/CX7 2.3L Turbo engine. Eliminates the ECU induced "boost-cut" condition when boost on the engine is raised beyond factory stock settings. The module has been designed to bolt on, inline with the factory MAP sensor using the simple hardware provided. No other changes or tweaks are necessary. Works well with both stock turbo with bolt-ons and big upgraded turbo setups. CAUTION: While we have found that this device works very well with the stock fuel system to retain good air/fuel ratios when boost levels are raised, the factory fuel system does have a limit and can only support so much boost/HP. The peak boost cut limit is almost completely removed with this modification so there will be no safeguard against overboost. You must closely monitor your air/fuel ratio and boost levels upon installation of this device to ensure that you are operating the engine in the safe running zone.

Our price: $75.00
Quantity
ATP Turbo BOV (Blow-off Valve) Pipe set, Hyundai Genesis Coupe 2.0T-Hyundai GenesisCoupe 2.0T
Part #: ATP-HGC-001
BOV (Blow-off Valve) Pipe set, Hyundai Genesis Coupte 2.0T, high flow, wrinkle black powder coat with turbo grade multi-ply silicone hoses and clamps. Choose HKS, Greddy, or TXS Flange, Choose silicone color (Black, Red, or Blue). Includes block off plate to delete the stock mechanical diverter valve at the turbo.

Our price: $149.00
Quantity