ATP Turbo

Products

  •  per page
ATP Turbo 900HP front mounted intercooler and mounting hardware Mustang GT (2005+) twin turbo application - Mustang GT (2005+)
Part #: ATP-MUS-005
900HP front mounted intercooler and mounting hardware for Mustang GT (2005+) twin turbo application. Charge pipes sold separately.

Our price: $849.00
Quantity
ATP Turbo 97-01 Audi/Passat 18T Stage II (Obsoleted by Eliminator series 2005)-VW/Audi
Part #: ATP-VVW-120
TBO Garrett/Honeywell GT25/T28 Turbocharger
TBO Dual Ball Bearing Trim
WGT Internal Wastegate Actuator
WGT Internal Wastegate Bracket
MISC Exhaust Manifold Adapter Plate
DNP Exhaust Discharge Flange
MISC CNC Inlet Adapter - 44mm outer diameter
MISC CNC Outlet Adapter - 50mm outer diameter
HARDW 2 Water Banjo Fittings (14mm)
HARDW 2 Water Hoses (18")
OIL Oil Feed Fitting Adapter
FUL High Rate Fuel Pressure Regulator
EP-MK418T EPROM, MK4, 18T Stage II
HARDW
8mm Studs(10) , 8mm nuts (10)
8mmà6mm Studs (2), 8mmà6mm nuts (2)
8mm hex bolts (5)
6mm bolts (3)
10mm bolts (3)
Washers (20)
KO3 TurboàManifold Gasket
T25 Gasket
Oil Return Gasket

Our price: $1950.00
Quantity
ATP Turbo 97-01 Audi/Passat 18T Stage II / No Ecu -VW/Audi
Part #: ATP-VVW-122
97-01 Audi/Passat 18T Stage II / NO SOFTWARE

Our price: $1725.00
Quantity
ATP Turbo 97-04 Audi/Passat 1.8T GT2X Eliminator Hardware Kit REV2 -VW/Audi
Part #: ATP-VVW-233
Up to 300HP (octane dependent), GT2X bolt-on turbo kit utilizing stock exhaust manifold in stock location. Completely stealth and stock appearing. Retains all emissions related components. All hardware required for complete bolt-on. Fueling kit is recommended to compliment this hardware kit. Refer to P/N: ATP-VVW-152 to purchase the injector and software package and P/N: ATP-VVW-153 for the upgraded 3" inlet pipe kit for higher HP levels.

Our price: $1395.00
Quantity
ATP Turbo 97-04 Audi/Passat 1.8T GT3071R-WG Eliminator Hardware Kit-VW/Audi
Part #: ATP-VVW-236
Up to and over 400HP (octane dependent), Ball bearing GT3071R-WG (Compressor side is 71mm 56 trim and turbine side is 84 trim .64 A/R) bolt-on turbo kit utilizing stock exhaust manifold in stock location. All hardware required for complete bolt-on. Completely stealth and stock appearing like ATP-VVW-151 and ATP-VVW-235 EXCEPT this turbos comes with a DIFFERENT COMPRESSOR HOUSING that has standard 3" inlet hose connection and 2" outlet hose connection so the STOCK inlet pipe WILL NOT FIT. You will have to do a custom 3" inlet pipe to the airbox with this turbo.

Click here for installation manual.

**** Turbo will not come with the smaller bolt-on inlet hose connection (even though picture shows it does)

****** Turbo will come with the compressor housing with 3" hose connection and 2" outlet hose connection.

This unit is uniquely built to drop right in and replace your stock turbo. It's compatible with the factory stock exhaust manifold and stock downpipe (or stock flanged high flow downpipe). This is a very stealth and easy to install Garrett dual ball bearing turbo that is capable of a lot of power, but in the stock location package.

Our price: $1795.00
Quantity
ATP Turbo 97-04 Audi/Passat 1.8T GTRS Eliminator Hardware Kit-VW/Audi
Part #: ATP-VVW-151
Up to 350HP (octane dependent), Ball bearing GTRS bolt-on turbo kit utilizing stock exhaust manifold in stock location. All hardware required for complete bolt-on. Completely stealth and stock appearing. Retains all emissions related components. Fueling kit is recommended to compliment this hardware kit. Refer to P/N: ATP-VVW-152 to purchase the injector and software package and P/N: ATP-VVW-153 for the upgraded 3" inlet pipe kit for higher HP levels.

Our price: $1690.00
Quantity
ATP Turbo 97-05 Audi/Passat 18T GT28RS H/W Kit -VW/Audi
Part #: ATP-VVW-124
The Hardware Kit features the following components:
-Precision Cast High Flow Turbo Manifold with GT28RS flange pattern.
-Garrett Dual Ball Bearing GT28RS Turbocharger assembly.
-Internal wastegate assembly with high psi base spring actuator.
-3.00” V-band Discharge Module.
-3.00” Stainless V-band downpipe assembly.
-3" MAF Housing in Polished Aluminum and silicone connectors.
-Custom CNC machined oil inlet/outlet fittings with oil control.
-Steel braided oil feed and return line assemblies.
-Custom CNC machined coolant fittings with AN style discharge/return.
-Steel braided, pre-assembled coolant line assemblies with - All hardware and comprehensive installation diagram.
Important Notes: This kit does not include Software/ECU Modifications or any fueling methods. A front mounted intercooler kit is highly recommended. If using kit with stock mounted intercooler, minor fabrication of the short section of pipe out of the turbo compressor discharge is required.

This kit deletes most emissions related devices such as:

- Crankcase breather recirculation (Breather filter or catch can used)
- Atmospheric BOV - (ATP BOV w/Anti-stall option recommended)
- Secondary air injection pump
- Stock cat (replaced by 3" highflow stainless downpipe)
* Drop-in replacement 3" cat will be available to swap out with 3" downpipe @ v-band connection

ATP will continue to provide a limited amount of special tunes for certain ECU codes, but these software requests should be made separately and independently of the sale of these hardware kits. Based upon feedback received from our customers in the recent months, this hardware needed to be offered separately in order to allow our customers to explore the various boost/fueling/tuning combinations.

Additional Notes:
Based upon the test data and the way we have seen this turbo combination respond on the longitudinal 1.8T engine, we believe that the 1.8T power plant with this combination will be VERY competitive in the year 2004. For people who crave HP levels up to the 350 range and are very sensitive to the "lag", this is the answer to the desire for "Big HP with Quick Spool."

With a good exhaust system, 300 whp can be done on modest boost levels and pump gas.

Our price: $2399.00
Quantity
ATP Turbo 98-05 Quattro Audi S3/A3/VW TT 1.8T GT2871R Eliminator Hardware Kit 225 HP model
Part #: ATP-VVW-165
400 HP 98-05 VW 1.8T GT2871R Eliminator Hardware Kit. Fits all Quattro 1.8T S3/TT, does not fit FWD Models. Also does not fit the 180HP Quattro model.

This unit is uniquely built to drop right in and replace your stock turbo. It's compatible with the factory stock exhaust manifold and stock downpipe (or stock flanged high flow downpipe). This is a very stealth and easy to install Garrett dual ball bearing turbo that is capable of a lot of power, but in the stock location package.

Our price: $1950.00
Quantity
ATP Turbo 98-05 Quattro Audi S3/A3/VW TT 1.8T GTRS for Eliminator Hardware Kit for 225HP model-VW/Audi
Part #: ATP-VVW-164
350HP 98-05 VW 1.8T GTRS Eliminator Hardware Kit. Fits all Quattro 1.8T S3/TT, does not fit FWD Models. Also does not fit the 180HP Quattro model.

This unit is uniquely built to drop right in and replace your stock turbo. It's compatible with the factory stock exhaust manifold and stock downpipe (or stock flanged high flow downpipe). This is a very stealth and easy to install Garrett dual ball bearing turbo that is capable of a lot of power, in the stock location package.

Our price: $1850.00
Quantity
ATP Turbo Adapter - ATP Fuel Rail - Stock FPR Use -VW/Audi
Part #: ATP-VVW-108
Adapter kit to allow a OEM Fuel Pressure Regulator to be used with the ATP Billet Fuel. Includes barb fittings to use with stock fuel lines, mounting port for stock FPR, anodized aluminum plug for end of fuel rail. All polished to mirror finish.

Our price: $79.95
Quantity
  •  per page