AEM

CDI Pencil Coil

AEM's new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, when Pencil Coils are used in high-boost, high-RPM, or high-compression applications, an increase in spark energy can be seen over factory smart coils.

AVAILABLE APPLICATIONS
# 30-2850: Single Coil Kit, CDI Short Pencil

# 30-2851: Single Coil Kit, CDI Long Pencil

# 30-2850-4PK: 4 Pack Coil Kit, CDI Short Pencil

# 30-2851-4PK: 4 Pack Coil Kit, CDI Long Pencil

*Legal in California only for racing vehicles which may never be used upon a highway.

KEY FEATURES

Compatible with all standard automotive spark plugs including threaded tip style
Kit includes pencil coil, connector, connector pins, pin lock and weather seals
Available in two different lengths for optimum plug reach
Two-wire CDI compatible coil
Must be used with CDI ignition module
MEASUREMENTS: Long coils measure 6.54 inches in total length
MEASUREMENTS: Short coils measure 5.64 inches in total length

4-channel K-type thermocouple amplifier.

AEM's 4-Channel K-Type Thermocouple Amplifier provides laboratory-grade accuracy for virtually any on-board temperature measurements. This unit utilizes low-cost K-Type thermocouple amplifiers to measure multiple engine system temperatures with better accuracy and faster response times than currently available temperature-measuring devices.

Unlike common single-channel gauges and amplifiers whose readings can vary up to 20? C from actual temperatures, AEM guarantees its 4-Channel K-Type Thermocouple Amplifier to read better than 1% full scale, even at the extremes of the temperature range! The unit achieves its laboratory-grade accuracy via a 100% surface-mounted PCB (printed circuit board) that has four differential temperature inputs fed into an A/D converter and fitted using a stage-three, eighth-order polynomial curve fit. The amplifier then compensates for this value using AEM's on-board cold junction temperature measurement, and then sends the temperature outputs on feedback-monitored 0-5v analog outputs and an RS-232 serial data stream.

The 4-Channel K-Type Thermocouple Amplifier is ideal for users who want to accurately monitor multiple engine system temperatures, including water, air, coolant, fuel, disc brake and more. Multiple channels allow you to use each amp to simultaneously read different system temperatures (one channel for EGT, one channel for CLT, etc.). Users can utilize ANY K-Type thermocouple including commonly-available miniature thermocouple connectors, and datalog the readings via an RS-232 serial data stream. K-Type sensors sold separately.

Uses common miniature thermocouple connectors or ANY K-Type thermocouple
On-board cold junction temperature compensation for laboratory-grade accuracy
Includes FOUR (4) 0-5v analog outputs
0-1,000? C(32-1,832? F) measurement range
Measures up to 20? C below cold junction temperature
RS-232 serial port included for datalogging (programmable EMS not required)
"Fault LEDs" indicate when a thermocouple is faulty
High-quality Deutsch connector
Mating harness included

AEM TRU-TIME Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Our gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile in one-degree increments via true laser-etched markings. Precision-cut gear teeth ensure no premature wearing of the belt surface and AEM's anodizing on the gear teeth is lab-test proven as the hardest anodizing process on the market.

AEM TRU-TIME Adjustable Cam Gears are available in a multi-spoke, five-bolt design for most vehicles and our classic full-faced, three-bolt design for select applications. Five-bolt cam gears have an "8" in the suffix (23-8XX), and three-bolt cam gears have a "6" in the suffix (23-6XX).

Increase horsepower and torque without any cam changes and are ideal for heavily modified engines
Grade-8, six-point hex bolts stand up to repeated adjustments and feature an integral washer flange for greater load distribution
True laser-etched markings on the leading edge of the gear allow for quick, accurate adjustments
Hard anodizing on belt surface is lab-tested as the most durable anodizing on the market
CNC-machined from 6061-T6 billet aluminum
Comprehensive installation instructions, recommended cam gear settings and decals included
Manufactured and assembled in the USA
For Off-Road use only

Price is per (1) Black Only!

96" UEGO sensor replacement cable for "Gauge-Type" Controller.

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

High-quality sealed sensor housings
Mating connector and 12" leads included (sensors)
Accurate and affordable!