ACT

ACT
We have the lowest ACT Clutch Kit Prices and the largest selection. We stock ACT Clutches for the Ford Mustang GT 2007, Neon SRT-4, Lancer Evolution 8, 9, DSM, Toyota MR2, Honda Civic, Acura Integra and many other vehicles.

Products

ACT Performance Street Clutch Disc: Avenger 95-98/2G DSM
Part #: 3001101

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Chrysler Sebring Lx (1995-1999)
Dodge Avenger Base (1995-1998)
Dodge Avenger Es (1995-1998)
Dodge Neon Base (1996-2000)
Dodge Neon Highline (1996-2000)
Dodge Neon Sport (1996-2000)
Eagle Talon Base (1995-1998)
Eagle Talon Esi (1995-1998)
Mitsubishi Eclipse Base (1996-1999)
Mitsubishi Eclipse Gs (1996-1999)
Mitsubishi Eclipse Rs (1996-1999)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: BMW M3 1995-99/Z3 1998-02
Part #: 3000801

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Bmw M3 Base (1995-1999)
Bmw Z3 M Coupe (1998-2002)
Bmw Z3 M Roadster (1998-2002)


Our price: $152.95
Quantity
ACT Performance Street Clutch Disc: Camaro 82-87/Mustang 86-01/Firebird 71-77
Part #: 3000903

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Chevrolet Camaro Base (1982-1987)
Chevrolet Corvette Base (1972)
Ford Mustang Bullitt (1986-2001)
Ford Mustang Cobra (1986-2001)
Ford Mustang Cobra Svt (1986-2001)
Ford Mustang Gt (1986-2001)
Ford Mustang Gts (1986-2001)
Ford Mustang Lx (1986-2001)
Ford Mustang Svt Cobra R (1986-2001)
Pontiac Catalina Base (1971-1972)
Pontiac Catalina Brougham (1971-1972)
Pontiac Catalina Safari (1971-1972)
Pontiac Firebird Base (1971-1977, 1979-1987)
Pontiac Firebird Esprit (1971-1977, 1979-1987)
Pontiac Firebird Formula (1971-1977, 1979-1987)
Pontiac Firebird S/E (1971-1977, 1979-1987)
Pontiac Firebird Trans Am (1971-1977, 1979-1987)
Pontiac Gto Base (1971-1972)


Our price: $169.95
Quantity
ACT Performance Street Clutch Disc: Civic 89-05/Del Sol 93-97/CRX 1989
Part #: 3000109

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Honda Civic 4wd (1989-2005)
Honda Civic Base (1989-2005)
Honda Civic Cx (1989-2005)
Honda Civic Del Sol S (1993-1997)
Honda Civic Del Sol Si (1993-1997)
Honda Civic Dx (1989-2005)
Honda Civic Ex (1989-2005)
Honda Civic Hx (1989-2005)
Honda Civic Lx (1989-2005)
Honda Civic Si (1989-2005)
Honda Civic Value Package (1989-2005)
Honda Crx Dx (1989)
Honda Crx Si (1989)


Our price: $114.95
Quantity
ACT Performance Street Clutch Disc: Ford Mustang 1986-01
Part #: 3001005

ProLite Flywheel

- Lightest XACT Flywheel
- Best throttle response, lowest inertia
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Road and Rally Racing

StreetLite Flywheel

- Lighter and Stronger than Stock Flywheel
- Better Drivability and Durability
- Super Rigid, Precision Made and Dynamically Balanced
- Recommended for Street and Drag Racing

ProLite & StreetLite Features:

- Quicker acceleration and increased throttle response
- Maximum gear life – gear will not wear out or fall off
- Serviceable – can be resurfaced with no need to purchased additional parts
- Chrome-moly Forgings three times more rigid than aluminum
- Longer lasting because of heat treated friction surfaces
- Excellent heat capacity from retaining adequate material behind the friction surface
- Super rigid trouble-free single piece design
- SFI certified to insure safety

Additional Information:

1) ACT flywheels are lighter, stronger and safer than stock cast flywheels to meet the ends of both enthusiast and hard core racer.
2) Material is properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity.
3) One Piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears.
4) Integral ring gear permits more weight reduction where it matters most and eliminates the chance of gear breakage or separation from the flywheel.
5) Precision machined threads will not easily strip out or get damaged like those found on aluminum flywheels.
6) ACT engineers XACT Flywheels using the latest CAD and FEA (finite element analysis) software to evaluate all design alternatives to get the best results possible.
7) By hot forging chrome-moly steel, each flywheel yields an ultra fine centralized grain structure that is superior in strength to any other manufacturing method.
8) Tuning Marks are precisely located and clearly displayed (when applicable).
9) ACT gives extra effort to strategically slot XACT ProLite flywheels to lower inertia without sacrificing strength and heat dissipation.
10) ACT heat treats the entire forging for strength and toughness, and induction hardens their ring gears for longest gear life.
11) XACT Flywheels are certified as meeting SFI Specification 1.1. ACT Flywheels are legal for competition in all racing organizations where SFI Certification is required.
12) Ring gears are cut with lead-in chamfers for better starter engagement and prevention against rounding of gear teeth.
13) Engineers at ACT demand tight tolerances for fit, concentricity and parallelism so that flywheels will have an exact fit onto the crankshaft, and operate smoothly even at extremely high rpm.
14) All flywheels are CNC machined and dynamically computer balanced for super smooth high RPM reliability.

Application(s): 

Ford Mustang Bullitt (1986-2001)
Ford Mustang Cobra (1986-2001)
Ford Mustang Cobra Svt (1986-2001)
Ford Mustang Gt (1986-2001)
Ford Mustang Gts (1986-2001)
Ford Mustang Lx (1986-2001)
Ford Mustang Svt Cobra R (1986-2001)


Our price: $169.95
Quantity
ACT Performance Street Clutch Disc: Ford Mustang 1999, 2003-06
Part #: 3001003

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Ford Mustang Cobra (1999,2003-2006)
Ford Mustang Gt (1999,2003-2006)


Our price: $169.95
Quantity
ACT Performance Street Clutch Disc: Forester 1998-06/Impreza 94-95, 98-04
Part #: 3000501

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s):

Saab 9-2x Aero (2005)
Saab 9-2x Linear (2005)
Subaru Baja Base (2003-2006)
Subaru Baja Sport (2003-2006)
Subaru Forester Base (1998-2006)
Subaru Forester L (1998-2006)
Subaru Forester S (1998-2006)
Subaru Forester X (1998-2006)
Subaru Forester X L.L. Bean Edition (1998-2006)
Subaru Forester Xs (1998-2006)
Subaru Impreza Base (1994-1995, 1998-2004)
Subaru Impreza L (1994-1995, 1998-2004)
Subaru Impreza L 4x4 (1994-1995, 1998-2004)
Subaru Impreza Outback (1994-1995, 1998-2004)
Subaru Impreza Rs (1994-1995, 1998-2004)
Subaru Impreza Ts (1994-1995, 1998-2004)
Subaru Legacy Base (1999-2003)
Subaru Legacy Outback (1999-2003)


Our price: $131.95
Quantity
ACT Performance Street Clutch Disc: Honda S2000 Base (2000-2006)
Part #: 3000106

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Honda S2000 Base (2000-2006)


Our price: $127.95
Quantity
ACT Performance Street Clutch Disc: Infiniti G20 91-96, 99-00/Sentra 91-94, 98-01
Part #: 3000410

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Infiniti G20 Base (1991-1996, 1999-2000)
Infiniti G20 T (1991-1996, 1999-2000)
Nissan 200sx Base (1995-1998)
Nissan 200sx Se (1995-1998)
Nissan 200sx Se-R (1995-1998)
Nissan Nx Base (1991-1993)
Nissan Sentra Base (1991-1994, 1998-2001)
Nissan Sentra Se-R (1991-1994, 1998-2001)


Our price: $110.95
Quantity
ACT Performance Street Clutch Disc: Infiniti G35 03-06/300ZX 87-96/350Z 03-06
Part #: 3000409

ACT Street Discs

- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating surfaces

Performance Disc

- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)

Stock Disc

- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)

Modified Disc

- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)

  ACT Stock ACT Modified ACT Performance
Torque Capacity (10=Highest torque capacity) 4 5 6
Heat Capacity (10=Highest heat capacity) 8 9 10
Quick Gear Shift (10=Quickest gear shift) 5 6 7
Smooth Gear Engagement (10=Smoothest engagement) 10 9 8
Durability (10=Most durable) 7 8 9
Disc Weight (10=Lightest weight) 3 3 3

Additional Information:

1) ACT carefully selects the right amount of cushioning between the linings to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening which improves clutch life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only gives liberal support for the springs, but also reduces stress concentrations that are a common cause for failure. (Offered on most ACT Modified and Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational strength.
5) They carefully broach splines to ensure exact fit onto transmission input shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
7) ACT Performance Street Discs feature a high copper content friction material. Through the use of copper the heat is pulled away from the surface. ACT achieves better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear, increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.

Application(s): 

Infiniti G35 Base (2003-2006)
Infiniti G35 X (2003-2006)
Nissan 300zx 2+2 (1987-1996)
Nissan 300zx Base (1987-1996)
Nissan 350z Base (2003-2006)
Nissan 350z Enthusiast (2003-2006)
Nissan 350z Grand Touring (2003-2006)
Nissan 350z Touring (2003-2006)
Nissan 350z Track (2003-2006)
Nissan D21 Base (1986-1989)
Nissan Pickup King Cab Xe-V6 (1995-1996)
Nissan Pickup Se (1995-1996)
Nissan Pickup Xe (1995-1996)


Our price: $148.95
Quantity